Ah ok, yeah I purchased my kit from Datsun freeway. They are the only ones that I know of that sell the kit complete with harness and switch. We do not offer this kit just for this reason. No sense in selling a conversion kit if it isn't complete.

http://www.datsun-freeway.com/products/350z-071.html

 

OP sorry for the slight threadjack

I found the part number but I decided against it for fear of it rattling with my sound system. I got the optional vertical JDM cargo net instead, not the same thing in the least but eh.



...as for the front fog lights. I have a c-west zerosun complete kit for my car with the HID foglight option. The wiring is all done but I still have to paint and install the kit (I've had it since '05,long story ). My car is chrome silver so for all intents and purposes this is how it will look with a different hood, set of wheels and '06-up lights...

 

^ Nice. OP, I would say just wire it to your taillights or just throw your reverse light in there and you will have a cool white/red light when you back up. Unfortunately, 99% of people won't even notice it. Cool upgrade though!

 

Riverside Infiniti is selling them they got 5 in

 

I'd send you the install instructions but I doubt it would do you any good if you don't have the harness or the switch.

edit: Actually OP I'd be interested in knowing if the non-fog-light spec harness will even fit in the fog-light assembly.

 

http://www.thezstore.com/page/TZS/PROD/350z04g/33-1360

this particular site has the light, harness, switch, and instructions. I'm on vaca right now but i'm planning on making this purchase in a week. Hopefully you'll have it completed by then but if not I'll give the info you require.

 

Ya I order my from riverside Sunday hopefully it should come this end of the week. I'm still figuring out how I'm gonna wire this oem style??? Any diagram would help?? And the switch is gonna be a b€%#h to find???

 

That is a datsun-freeway kit.

 

Our fog light switches are built into the stalk on the steering wheel... IIRC! Too much snow to go to the garage though to check!

But! On the rear cluster loom it appears that on the 4 pin connector that only 3 pins are used on the cluster side, but there are 4 wires in on the "car" side.. if you switch the pins on the clustor side so the one that went into the reverse goes into the spare pin socket you should get the fog when its connected.. but then you need to switch somewhere!

This is obviously just doing it in reverse of the UK cars so I may well be totally wrong!

 

^ Yours is probably just like this...

 

It most certainly is Kwame!!

 

I'm jealous...

 

OP Sorry to thread jack even more, but Kwame where did you find that horizontal cargo net?

Or part # por favor?

 

http://z1auto.com/prodmore.asp?model...or&prodid=4449

 

Ty!

 

Only a presumption, but if you happened to get one of these from the UK (Obviously you would need both sides! as your light stalk is on the right isnt it?) it might me the case that it will all work when you plug it all in and connect to a rear fog if you needed it?

Again am sure there will be a few available on crashed cars over here so maybe worth a go?

 

There will be a few over the next few weeks with the way the weather is

I'm sure Lee would be able to get a set

 

So what exactly was missing when you did the conversion?

 

Nothing.

 

hey kwame@z1auto, did u run a wire from the fuse box accessories pin??? for that foglight??