Strosek Spoiler Owners
#42
Registered User
Join Date: May 2009
Location: arcola IL
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
#43
350Z-holic
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,240
Received 411 Likes
on
235 Posts
one of the best looking wings for the car i think..
making it adjustable would be pretty simple to be honest.
replica or not, matters not its not a functional wing.
.. this wing is not a reverse airfoil shape, ie, creating low pressure underneath and higher pressure on top, ie, functional downforce.
It is also located in the choppy turbulent air near the slipstream of the trunk edge, and is probably about 6-12 inches lower than the "clean air" that can actually affect downforce.. this wing willsimply create drag.. BUT... it does look damn good.
Want some downforce out of it?
gurney flap it.
its basically a right angle at the trailing edge of the wing.. and.. they make it SUPER cheap on ebay.. just from searching for universal gurney flap, i found they are limited and very expensive.
I am adding it to my Elia wing as well as my 61" functional carbon gt wing.. it adds minimal drag yet creates considerable effect to downforce.
best part" I found something 99% similar on ebay for like 20 bucks. and they offer it painted. and its flexible.
http://www.ebay.com/itm/Painted-Niss...cc7034&vxp=mtr
they offer custom lengths as well.. they stated they can make it in 61" for me no problem.
BTW that orange Stosek car's wing is that same as yal's.. it just has an extension on the stanchion mounts and is mounted to their tunnel hatch.
making it adjustable would be pretty simple to be honest.
replica or not, matters not its not a functional wing.
.. this wing is not a reverse airfoil shape, ie, creating low pressure underneath and higher pressure on top, ie, functional downforce.
It is also located in the choppy turbulent air near the slipstream of the trunk edge, and is probably about 6-12 inches lower than the "clean air" that can actually affect downforce.. this wing willsimply create drag.. BUT... it does look damn good.
Want some downforce out of it?
gurney flap it.
its basically a right angle at the trailing edge of the wing.. and.. they make it SUPER cheap on ebay.. just from searching for universal gurney flap, i found they are limited and very expensive.
I am adding it to my Elia wing as well as my 61" functional carbon gt wing.. it adds minimal drag yet creates considerable effect to downforce.
best part" I found something 99% similar on ebay for like 20 bucks. and they offer it painted. and its flexible.
http://www.ebay.com/itm/Painted-Niss...cc7034&vxp=mtr
they offer custom lengths as well.. they stated they can make it in 61" for me no problem.
BTW that orange Stosek car's wing is that same as yal's.. it just has an extension on the stanchion mounts and is mounted to their tunnel hatch.
Last edited by bmccann101; 05-07-2012 at 02:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM