I've always wanted to mount my license plate on my Ing+1 front bumper.

Unfortunately google hasn't turned up anything substantial in terms of a good place for the plate.

Most pictures were taken with the plate off (for obvious reason) or were just ugly.

For those who have the Ing+1 bumper please post of pics of your cars with the plate location.
or If you have any suggestions please let me know.

The plate it currently Zip tied to the mesh...

I'll start us off...

 

I would just leave it ziptied.....easily removed for photoshoots and still legally mounted on front of car.

 

Mhm. Agreed but I'm curious to see if there are any good places for plate placement that I haven't thought of yet.

I've tried photoshopping (Ms paint....) the plate around to see different places.

 

I'd go along with the ziptie solution, at least it stops you from drilling holes in a great front bumper.

 

when i had that bumper i rested the plate right on the lip, right in front of the right side "tooth" and zip tied it around the tooth, i dont think i have pics -_-

 

Zip tied mine to the Mesh As well.

 

Tow hook plate mount! I have the same front and IF I ever catch crap for no front plate, that's where I'm mounting it

 

I wouldn't say great... Atleast mine isn't fitment wise...
Let me just say, never getting KBD Urethane again...



I too was thinking about this. I like the look of the tilted down plate.
Plus it'll look even more inconspicuous with the tilt.
But didn't want to risk getting hassled and cutting through my new mesh...D:

 

Really the best I can do for now.
I was thinking of having it there between the pillar and bumper in the middle of the opening.
I went to Kirmac collision, got a ton of crap about why they can't put it there...


Looking for some input from OG's like Dikspiel and Litoflow.

Thank you all for your input thus far.

 

I have some pics of where I mount my uk plate (accross the large flatish part below the bonnet, I will post them up if you want when I get home to my computer. (some pics of smaller plate before I had to change back to the uk big ugly standard one) also gun metal grey with the black spliter bottom strip like yours.

 

Cutting $5 worth of mesh vs the plate flapping/rubbing/scraping your paint. Decision is obvious to me.

 

thats where i had mine, but lower sitting on the lip. that was the best place i could find

 

 

I would get a couple of L brackets and attach it on one side or the other along the bottom side of the bumper and use the lower plate holes to bolt it to the brackets.

 

I have a mounting bracket that attaches at the bottom of the intercooler for mine.

 

My thoughts exactly.
That's what I proposed to the manager at Kirmac...
guess I'll be heading to the hardware store...

Dude told me that I would need special L brackets to make sure the plate bracket and plate don't bend in the highway?
Doesn't sound right to me.

 

mine is pretty stiff and has supports behind it so, hasn't bent yet.

 

Dude... can never get over your friggin car...

But if I wanted to do what you did, I would need an FMIC (Fake Mounted InterCooler.