Notices
Exterior & Interior 350Z Body modification, interior styling and lighting

Wire identification. HELP!

Thread Tools
 
Search this Thread
 
Old Jan 4, 2016 | 07:28 PM
  #1  
Twenty4's Avatar
Twenty4
Thread Starter
Registered User
iTrader: (8)
 
Joined: Sep 2007
Posts: 414
Likes: 0
From: newbury park, CA
Default Wire identification. HELP!

The photos below show a disconnected red wire with a silver spot at the plug into the SRS airbag sensor, under the center console. The sensor has been removed from my car, so the plug is not going to anything. Coincidentally my fuel gauge is not reading at all, so I'm hoping this is not contributing to that. Can anyone identify this wire?





Reply
Old Jan 5, 2016 | 02:32 AM
  #2  
karlt's Avatar
karlt
New Member
 
Joined: Dec 2008
Posts: 259
Likes: 56
From: Williamsville, NY
Default

You don't identify the year and model car you have, but the SRS sensor unit is pretty standard across all models.

Wiring diagrams are in the Service Manual, which you can download free. I strongly recommend everyone get one and refer to it before posting their questions. All that aside, the red wire to pin 1 on the connector is the power lead. Cutting the wire has the same effect as pulling fuse 13; it disables the entire SRS. As a result, the airbag light on your dash should be illuminated continuously. It should have no effect on your fuel gauge.
Reply
Old Jan 5, 2016 | 01:56 PM
  #3  
zakmartin's Avatar
zakmartin
New Member
 
Joined: Feb 2009
Posts: 2,821
Likes: 512
From: Seattle, WA
Default

If you plan to repair that wire, disconnect the negative battery cable first and let the car sit for at LEAST 1/2 hour before you mess around with it.
Reply
Old Jan 5, 2016 | 09:23 PM
  #4  
Twenty4's Avatar
Twenty4
Thread Starter
Registered User
iTrader: (8)
 
Joined: Sep 2007
Posts: 414
Likes: 0
From: newbury park, CA
Default

Originally Posted by karlt
You don't identify the year and model car you have, but the SRS sensor unit is pretty standard across all models.

Wiring diagrams are in the Service Manual, which you can download free. I strongly recommend everyone get one and refer to it before posting their questions. All that aside, the red wire to pin 1 on the connector is the power lead. Cutting the wire has the same effect as pulling fuse 13; it disables the entire SRS. As a result, the airbag light on your dash should be illuminated continuously. It should have no effect on your fuel gauge.
Thanks for your help!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
qew
Engine
5
Mar 21, 2016 10:02 PM
abe0911
Maintenance & Repair
4
Jan 3, 2016 07:36 PM
savedbygrace
Exterior & Interior
11
Jan 1, 2016 10:43 PM
allmycarsdie
Engine & Drivetrain
5
Jan 1, 2016 04:31 PM
Blurvision
Brakes & Suspension (DIY)
3
Dec 31, 2015 01:04 PM




All times are GMT -8. The time now is 02:01 PM.