seats
#1
Registered User
Thread Starter
Join Date: Jun 2018
Location: Mississippi
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
seats
2008 350z HR base model. looking for recline able seats suggestions.. im 6'4, with a 34 waist, 210 lbs and are durable for daily driving. I would like sliding rails that sit lower than factory too.
#4
Registered User
Thread Starter
Join Date: Jun 2018
Location: Mississippi
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#5
New Member
iTrader: (11)
Well there is no way to go lower than stock if you want sliding/reclining seats unless you go with a custom made bracket. Every bracket made for the car will result in a higher seating position without a fixed seat. I got recaro seats, sliders and brackets. They sit higher but it's bearable.
#6
New Member
I agree with DarkZ03. When I investigated seat replacement for my 350z, all options resulted in a higher seat position. New seats using the existing seat rails sat higher; new seats with new seat rails sat higher. The 350z’s OEM seat rails are very low and tight to the floor.
I decided to keep the original seat rails and place new covers on the existing seats.
I decided to keep the original seat rails and place new covers on the existing seats.
Well there is no way to go lower than stock if you want sliding/reclining seats unless you go with a custom made bracket. Every bracket made for the car will result in a higher seating position without a fixed seat. I got recaro seats, sliders and brackets. They sit higher but it's bearable.
Thread
Thread Starter
Forum
Replies
Last Post