I currently upgrading my 03 headlights to 06 style Depo headlights, The car already has an 8pin connection, but my driver side was wired individually. I bought the male connection from conceptZ but can't figure out which wire goes where. Anyone have a picture if there driver side connection?

Harness from ConceptZ

Headlight harness from the chassis

 

Is there any reason the wires are cut? The plug can be popped off and the wires pulled out. This has been done in previous threads.

 

Previous owner had done some re wiring for HID’s,

 

Pin #, color, description

1: Black, Turn signal; Parking light; Side Marker, Ground -
2: Green.White, Turn signal, 12+
3: Red/Yellow, Headlamp High, 12+
4: Black, Headlamp High, Ground -
5: Red/Blue, Side Marker, 12+
6: Red/Blue, Parking Light, 12+
7: Red/Black, HID Low, 12+
8: Black, HID Low, Ground -