FS: '03 track exterior/engine bay parts
'03 track exterior/engine bay parts
!!! ALL PRICES ARE WITHOUT SHIPPING !!
engine bay trim
both caps, trim pieces, rubber seals, engine cover
$150 for all of it
most of it is perfect condition except the engine cover has a little paint and the rub spot from the strut brace...
front bumper crush brackets (have the aluminum bar somewhere too)
$75 for both braces (extra for the bar if you ask... i'd have to find it though)
CF MG style rear hatch
has some cracking going on and needs new clear coat... kind of old and all... it is foam filled for rigidity to prevent further cracking and comes with wires for defrost window and the window itself
the latch is modified so it shuts tighter (MG hatches tend to have a big gap in the back if you dont have external latches or modify the internal latch)
this MIGHT require you to dremel out a bit of the plastic panel that has the hole for the latch to go into, mine was broken before i modified it so im not sure if it will make any difference
selling for $300... basically the cost of a new piece of glass +install
i also have a damaged AIT BMagic F1 Series CF hood with four corner hood pins
stock '03 HID head lights and '03 tail lights... a bit scuffed but easily restored to almost new
if you're interested in any of that stuff i'll list stuff and take more pics
that one shows the headlights and most of the damage to the hood
engine bay trim
both caps, trim pieces, rubber seals, engine cover
$150 for all of it
most of it is perfect condition except the engine cover has a little paint and the rub spot from the strut brace...
front bumper crush brackets (have the aluminum bar somewhere too)
$75 for both braces (extra for the bar if you ask... i'd have to find it though)
CF MG style rear hatch
has some cracking going on and needs new clear coat... kind of old and all... it is foam filled for rigidity to prevent further cracking and comes with wires for defrost window and the window itself
the latch is modified so it shuts tighter (MG hatches tend to have a big gap in the back if you dont have external latches or modify the internal latch)
this MIGHT require you to dremel out a bit of the plastic panel that has the hole for the latch to go into, mine was broken before i modified it so im not sure if it will make any difference
selling for $300... basically the cost of a new piece of glass +install
i also have a damaged AIT BMagic F1 Series CF hood with four corner hood pins
stock '03 HID head lights and '03 tail lights... a bit scuffed but easily restored to almost new
if you're interested in any of that stuff i'll list stuff and take more pics
that one shows the headlights and most of the damage to the hood
Last edited by Archaismic; Mar 19, 2012 at 03:57 PM.
Trending Topics
If you are parting your Z out, I need the passenger side Exterior A-Pillar. It goes from the hood to the hatch, in-between the roof and door window. Also the steel strip, screws and any other hardware the A-Pillar attaches with. If you want to sell it, please PM me.
Last edited by BlizagaXx; Mar 23, 2012 at 08:42 AM. Reason: Typos
im not parting out... just selling some stuff that got the hell beat out of it from drifting and such OR that was removed long ago when the car was just a wee pup
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM