RC Injector Question
Thread Starter
Sponsor
Forged Performance
Forged Performance
iTrader: (92)
Joined: Dec 2003
Posts: 13,733
Likes: 1
From: Marietta, GA
RC Injector Question
Quick question for everyone. The Greddy RC 440cc injecotrs have a plastic 3 holed insert on the bottom of the injector, so that the nozzle is essentially flush with the tip of the injector. The RC 550cc injectors do not have this 3 holed nozzel. They do have a 4 orifice, but the orifice is deep within the injector body. The bore of the injector tip is also wider..I assume to support the larger flow of fuel. Is this how the injector should look?
My point is that the tip of the 440 looks different than both the stock injector and the 550 injector.
My point is that the tip of the 440 looks different than both the stock injector and the 550 injector.
Re: RC Injector Question
Originally posted by gq_626
Quick question for everyone. The Greddy RC 440cc injecotrs have a plastic 3 holed insert on the bottom of the injector, so that the nozzle is essentially flush with the tip of the injector. The RC 550cc injectors do not have this 3 holed nozzel. They do have a 4 orifice, but the orifice is deep within the injector body. The bore of the injector tip is also wider..I assume to support the larger flow of fuel. Is this how the injector should look?
My point is that the tip of the 440 looks different than both the stock injector and the 550 injector.
Quick question for everyone. The Greddy RC 440cc injecotrs have a plastic 3 holed insert on the bottom of the injector, so that the nozzle is essentially flush with the tip of the injector. The RC 550cc injectors do not have this 3 holed nozzel. They do have a 4 orifice, but the orifice is deep within the injector body. The bore of the injector tip is also wider..I assume to support the larger flow of fuel. Is this how the injector should look?
My point is that the tip of the 440 looks different than both the stock injector and the 550 injector.
Thread
Thread Starter
Forum
Replies
Last Post