lol touche!
So you got your car back from the shop, how much boost are you running now? and any dyno #s?

 

OMG, That Z is awesome!!! I cant wait to see some numbers you throw down. Will you take it to the track in ABQ sometime? I live in Farmington, NM and would drive down to ABQ to see that *****. I noticed a few guys from Nm on this thread. I am trying to round up a small Z or G meet mid to end April in ABQ at Elliotts Bar/Grill. So far I have gotten only 3 guys that say they will try to got that are also from ABQ. Anyone else down for a beer and some grub then a nice Z drive around town. Possible dates-April 17 or April 23 or 24th. There is a post in the Southwest regional forum. BEN

 

Im on the good old SHORE DUTY

just started my 3 year vacation........

ETA of deployment 4 Yrs from now after my C school......

Me and my Z have time to get close.....

 

No I'm not touche, just kidding around with you.

My dyno day is set for next Saturday. I'll definately post pics and numbers.

Looking to tune for 11.5psi and 15psi for starters. Then, next month I am moving to CT so I will be stopping by CJ Motorsports in W. chicago and then I'll be tuning for....I'll keep that a surprise.

 

Funny how you said you were a ET, I use to be a AT2(A/W) on helos back in the day.

 

I am definately up for a Z meet. I keep promising Jason I'll show up one of these days and give him a ride. I know of 2 other Z members here in Alb that would also be interested.

 

As soon as I finish my degree im appling for OFFICER......

Thats where the real money is at.....

 

can't resist

cloudy meant touche...pronounced ...two-shay..like-witty response

ernie...i'm not in town or i would have definately gone on a drive with you...wanna take me for a ride on wednesday?

TODD

 

I'm down...just tell me when...my car should be done this week or early next..dynoed/tuned by the 9th or 16th of april,,end of april, ernie and i would have some power to bring to the plate!

TODD

 

Lol ya 350zDCalb got that, i didnt mean "touch-y" i meant what he said, witty response. haha :P
Ya but post the dyno #s asap, i wanna see!

 

If you want to see the exact date of the meet, check out the post titled New Mexico Z's in the SW regional forum on this site. Theres been response from other guys in ABQ but no one has a set date in mind yet. I think we are all typical procrastinators waiting to the last min to see if we can plan it. Any ways, I hope we can get something together, nothing formal, just a bunch of nice Z in the parking lot to look at and go for a nice Z convoy around town, be sure to catch everyones eye. As far people not wanting to go because their not tuned, or dynoed yet , yada yada yada, Just go, look at my sig, nuf said. lol My Z is stock compared to you guys. OK, sorry to thread jack.
Going Deep, I dont want a ride in your car!!! Because if I do, I will be forced to sell my little sister on ebay in order to get the twin turbos. One drive in a car like your, and everyday I get back in my Z I will feel like im pulling a 25 ft Bayliner. when WOT. BEN

 

I just ran into to Damon on Montgomery today, he works every other Sunday but April 17th would work for him. Hey, I guess we should let Jason know, lol, it is his bar/parking lot afterall. I am sure he wouldn't mind the business.

 

LMAO, I am such a dumb a$$, I definately read that wrong.

 

Lol you just prob read that way tooo fast.
Wait so why did you do a engine build up? (too lazy to go back to page 1 which probably explains it)
Did you blow your engine? What did you damage? Or did you just decide to build up because you wanted too. What did you build up? what exactly and how much for parts and labor?

 

I did my build up after breaking a rod and it subsequently put two windows in my block. Luckily, no head or turbo damage though.

As far as internals/build up are concerned...I already had the turbo stuff and exhaust, everything else was done during the rebuild.

GReddy Twin Turbo with
.8Bar Tial Wastegate springs aka 11.5psi
GReddy FMIC
GReddy Profec e-01 boost controller
GReddy Timing Harness
GReddy Turbo Timer with CF plate
GReddy EO-1 to emange wire
GReddy Type RS blow off valve ON THE WAY
ATS Twin Plate Carbon Clutch
Pauter Connecting rods
Arias pistons 8.6:1 CR
ARP Main studs
ARP Head studs
ARP Rod bolts
Walbro 255 fuel pump
AAM Fuel Return System
RC 550s fuel injectors
Defi BF series:
Boost gauge
Oil Press gauge
EGT Gauge
Defi Control Box
Autometer single pod
AEM AFR gauge
APS Oil Pan
UR racing pulley set(blue)
Koyo Aluminum Radiator
NISMO Thermostat TO BE INSTALLED
Stillen Race Pipes
Stillen SS Exhaust Dual Wall tips
NGK one step colder plugs
B & M short shifter

As far as cost, including everything from turbos to forged internals, close to or just past 30k. Yeah, I know, I know, I am completely nuts.

 

WoooHoooo. Got all my tracking numbers for my wheels!!!!!!!!!!!!!!!!!!
I'll post pics next week!

 

I so wish i had the money to do all that .

 

so did i at 17..i'm not much older...but...look at it this way...put in a good 6 yrs of school-go into a good career..then make lots of $$$ and you won't have to rob any banks.

 

WooooHoooo

Just accepted sponsorships from Rotora and Seibon!!!!!!!!!!!!!

 

How old are you now, and what do you do?

Idunno what i want to do when i get older, business wise, right now i enjoy just acting and modeling, and hopeing to make money off that... but the thing is, if that falls threw the floor, then what do i have? notn.. so i should think about what i want to do, just so i can make money and get my Z all fast and purddy.