Notices
Forced Induction Turbochargers and Superchargers..Got Boost?

Stillen supercharger belt number

Thread Tools
 
Search this Thread
 
Old Oct 1, 2005 | 10:30 AM
  #1  
00Z's Avatar
00Z
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 30
Likes: 0
From: denver
Default Stillen supercharger belt number

Does anybody know the part number of the belt that runs directly off of Stillen's supercharger? It must have worn off of the belt and the instructions for some reason do not give you the part number for this belt.
Reply
Old Oct 2, 2005 | 02:10 PM
  #2  
g35twinturbo's Avatar
g35twinturbo
Registered User
iTrader: (1)
 
Joined: Nov 2003
Posts: 361
Likes: 0
From: Los Angeles
Default

call stillen ask for sam in r&d

866-250-5542
Reply
Old Feb 21, 2006 | 02:14 PM
  #3  
TTRANK's Avatar
TTRANK
Registered User
iTrader: (25)
 
Joined: Jan 2006
Posts: 784
Likes: 0
From: Phoenix
Default

If anyone is looking for this in the future they have changed to all Gates belts and the part numbers are:

Main Drive Belt: K060500 (I used a 505 because the 500 would not fit after 2 hours of trying)
Middle Belt (6 rib): K060288
Blower Belt (4 rib): K040220 (this one is hard to find because it is a new part for Gates. I just had to order one because no one in all of Phoenix has one)
Reply
Old Feb 21, 2006 | 02:58 PM
  #4  
BlackSpec02's Avatar
BlackSpec02
Registered User
iTrader: (17)
 
Joined: Jun 2004
Posts: 2,039
Likes: 0
From: San Diego
Default

nice info! I'm subscribing so I can find this thread in the future...
Reply
Old Feb 22, 2006 | 10:45 AM
  #5  
superchargedg's Avatar
superchargedg
Damn Noobs
iTrader: (4)
 
Joined: Dec 2005
Posts: 7,274
Likes: 2
From: timonium,md.
Default

Originally Posted by TIMMAHH
If anyone is looking for this in the future they have changed to all Gates belts and the part numbers are:

Main Drive Belt: K060500 (I used a 505 because the 500 would not fit after 2 hours of trying)
Middle Belt (6 rib): K060288
Blower Belt (4 rib): K040220 (this one is hard to find because it is a new part for Gates. I just had to order one because no one in all of Phoenix has one)
it seems nobody has this belt(ko40220)i had to order from stillen,found out that performancenissanparts has them also.you cant even cross it over to any other belt companies,i even went to gates belt co. they dont even list it on their site.
Reply
Old Feb 22, 2006 | 02:18 PM
  #6  
BlackSpec02's Avatar
BlackSpec02
Registered User
iTrader: (17)
 
Joined: Jun 2004
Posts: 2,039
Likes: 0
From: San Diego
Default

the bearing is shot on my idler pulley on my serpentine belt... now anyone know where I can get a new one of those?!?!
Reply
Old Feb 23, 2006 | 06:53 AM
  #7  
superchargedg's Avatar
superchargedg
Damn Noobs
iTrader: (4)
 
Joined: Dec 2005
Posts: 7,274
Likes: 2
From: timonium,md.
Default

Originally Posted by BlackSpec02
the bearing is shot on my idler pulley on my serpentine belt... now anyone know where I can get a new one of those?!?!
hey bud i think you are going to be stuck calling stillen on that one.you might try tony at performancenissanparts also.
Reply
Old Apr 24, 2006 | 11:06 AM
  #8  
ffej0427's Avatar
ffej0427
Registered User
 
Joined: Dec 2005
Posts: 11
Likes: 0
From: CALIFORNIA
Default

Looks like they changed the blower belt to K080220. The belt looks a little thicker and hopefully stronger.
Reply
Old Apr 24, 2006 | 12:31 PM
  #9  
superchargedg's Avatar
superchargedg
Damn Noobs
iTrader: (4)
 
Joined: Dec 2005
Posts: 7,274
Likes: 2
From: timonium,md.
Default

Originally Posted by ffej0427
Looks like they changed the blower belt to K080220. The belt looks a little thicker and hopefully stronger.
i highly doubt that, the meanings of the belt #,s are,ko40 is a 4 rib belt 22 inches long,a ko80 is a 8 rib belt 22 inches long.it wouldnt fit in the space provided.
Reply
Old Apr 24, 2006 | 01:21 PM
  #10  
Dr.G's Avatar
Dr.G
Banned
 
Joined: Dec 2005
Posts: 135
Likes: 0
From: Lebanon
Default

Originally Posted by ffej0427
Looks like they changed the blower belt to K080220. The belt looks a little thicker and hopefully stronger.
you re right it does look a bit thicker (i hope so)the blower belt does not last a long time , slight overtightening will make it go in less than 5K.
Reply
Old Apr 24, 2006 | 01:37 PM
  #11  
ffej0427's Avatar
ffej0427
Registered User
 
Joined: Dec 2005
Posts: 11
Likes: 0
From: CALIFORNIA
Default

Maybe they cut it in half then, to make it a 4 rib belt. Either way the belt I just received says the above part number.
Reply
Old Sep 21, 2006 | 09:00 AM
  #12  
World Famous Z's Avatar
World Famous Z
Registered User
iTrader: (42)
 
Joined: Apr 2006
Posts: 842
Likes: 1
From: So Cal
Default

Stillen SC blower belt 4-rib K040220
Lower Main Serpentine Belt 6-rib K060500
Upper Jackshaft belt 6-rib K060288

These are the correct part numbers u need.
finding the k040220 will be really tough, it doesn't come up in most auto parts stores computers, i'm not sure if it is a specialty belt only for stillen.....
the other two can be found at napa, etc....
Reply
Old Sep 21, 2006 | 01:08 PM
  #13  
BlackSpec02's Avatar
BlackSpec02
Registered User
iTrader: (17)
 
Joined: Jun 2004
Posts: 2,039
Likes: 0
From: San Diego
Default

You can order k040220 through stillen for about 18 bucks or through performance nissan for the same price.... I got mine through perf nissan and it only took a couple days to get here... only problem would be if you broke yours and couldnt drive until you got a new one.

EDIT: You can actually find that belt on performance nissans website in the forced induction section under the stillen supercharger...
Reply
Old Sep 21, 2006 | 01:26 PM
  #14  
WA2GOOD's Avatar
WA2GOOD
Banned
iTrader: (24)
 
Joined: Dec 2004
Posts: 1,474
Likes: 0
From: San Diego
Default

The K080220 is just that, a cut down version of the original belt K040220 this number (4 or 8) mean that it is either a 4 or 8 rib belt. The (22) number means that it is 22 inches long (around).

If you are replacing your belts with a K080220, be carefull, they have a tendamcy to fraigh because these belts do not like to be cut. I have alot of experience with both, the cut ones are a pain sometimes. Try to specify a 4 rib 22 inch belt. Stillen is just getting cheap on us and ordering the 8 rib and cutting it to make two belts.
Reply
Old Sep 21, 2006 | 01:41 PM
  #15  
Brian@Performance's Avatar
Brian@Performance
Sponsor
Performance Nissan
iTrader: (3)
 
Joined: May 2006
Posts: 193
Likes: 0
From: Duarte, CA
Default

Hey there. We actually sell that part on our site and you can buy it here. Stillen S/C Belt
Reply
Old Sep 22, 2006 | 07:55 PM
  #16  
ffej0427's Avatar
ffej0427
Registered User
 
Joined: Dec 2005
Posts: 11
Likes: 0
From: CALIFORNIA
Default

Originally Posted by Brian@Performance
Hey there. We actually sell that part on our site and you can buy it here. Stillen S/C Belt
Which one is it?

407350-19 NISSAN 350Z 2003-2006 ; 22 Inch 4 Rib Belt $17.50
or
407350-22 NISSAN 350Z 2003-2006 ; Drive Belt for Supercharger $25.00

Thanks
Reply
Old Sep 23, 2006 | 05:04 AM
  #17  
wilric44's Avatar
wilric44
Registered User
 
Joined: Jan 2005
Posts: 329
Likes: 0
From: WA
Default

Are all the belts the same for the Stage, 2,3, and 4 SC? Just one of those need to know questions since we areon the subject of belts. I am thinking about getting extra belts for the stage 2.

Have not seem my car yet so I am just wondering about the belt issue. If I upgrade to the stage 3, I am assuming I need a different belt.
Reply
Old Sep 23, 2006 | 05:42 AM
  #18  
superchargedg's Avatar
superchargedg
Damn Noobs
iTrader: (4)
 
Joined: Dec 2005
Posts: 7,274
Likes: 2
From: timonium,md.
Default

Originally Posted by wilric44
Are all the belts the same for the Stage, 2,3, and 4 SC? Just one of those need to know questions since we areon the subject of belts. I am thinking about getting extra belts for the stage 2.

Have not seem my car yet so I am just wondering about the belt issue. If I upgrade to the stage 3, I am assuming I need a different belt.
the small belt is the same for all stages.
Reply
Old Sep 23, 2006 | 06:22 AM
  #19  
wilric44's Avatar
wilric44
Registered User
 
Joined: Jan 2005
Posts: 329
Likes: 0
From: WA
Default

Originally Posted by superchargedg
the small belt is the same for all stages.
Ok that is one belt. What about the other two. Dont mean to sound like a novice, but it is hard to tell anything without directly looking at it. Does the other two belts change.

What is your set up and belt numbers. I might go stage 4 next summer. Thanks for the help.
Reply
Old Sep 23, 2006 | 07:18 AM
  #20  
superchargedg's Avatar
superchargedg
Damn Noobs
iTrader: (4)
 
Joined: Dec 2005
Posts: 7,274
Likes: 2
From: timonium,md.
Default

Originally Posted by wilric44
Ok that is one belt. What about the other two. Dont mean to sound like a novice, but it is hard to tell anything without directly looking at it. Does the other two belts change.

What is your set up and belt numbers. I might go stage 4 next summer. Thanks for the help.
Stillen SC blower belt 4-rib K040220
Lower Main Serpentine Belt 6-rib K060500
Upper Jackshaft belt 6-rib K060288
these are my belt #,s
Reply



All times are GMT -8. The time now is 03:29 PM.