Does anybody happen to have the Greddy TT Intercooler parts list/install guide in electronic format that they can send me? I can only grab the Greddy TT kit (minus Intercooler) install guide/parts list from their website.

I already tried searching for this with no luck...

Thanks for any help guys!

--justin

 

http://www.greddy.com/

Go under the tech section....there are the 3 sections for the 350Z greddy TT installation. Should have the info in there.

 

Thanks for the link but I've already gone thru there. The guides you reference are the installation/parts list for the first 2 boxes that include everything for the kit except the FMIC w/ the appropriate piping. I need the parts list/installation instructions for the 3rd box, which is the FMIC w/ additional piping.

Bump!

 

call greddy, tell them to fax it. You have to re-route the horn, the airbag sensor, and the fluid lines. Its pretty simple

 

call greddy, tell them to fax it. You have to re-route the horn, the airbag sensor, and the fluid lines. Its pretty simple

 

Good luck man, off topic. I been trying to get a hose from greddy for over three week. No luck. If anybody has an extra 60-80' reducer I would pay for it. Final part to finish the greddy kit install. Since greedy is not willing to help maybe the Z community will help me out or know a place where I can buy one. Early thanks

 

mrrsx350z - give www.hightempsilicone.com a shot they've got 4ply reducers

 

Hey thanks Juztin, the Z community is great. Alway got a helping hand.

 

Justin: From your post I assume that you got a Twin Turbo or are looking at getting one. Trying to fight the altitude of Cowtown? Congrats if you did get one, we'll deffinately have to get together for a meet now so you can show off that system. I would also like to talk to you about the FI systems too.
David

 

Hey man! already have the Greddy TT but the only thing is I dont have the parts list/install guide for the intercooler (and I wanna verify I got everything ready to go) so I was trying to see if anybody on this board may happen to have the pdf format of it or if they can fax it over to me.

I just got a hold of Ted @ Greddy so I'm gonna see if I can a copy of that documentation from him.. If so I'll be sure to post it here incase any1 ever runs into the issue.

Howu been? Last time I saw you was when you came by the meet @ Tobi's TC Performance. And the altitude does wonders to n/a power output here as your well aware

 

Got the guide - I'll post the scanned pics of it once I can downsize them.

 

Juztin!
Please do!!
Im in the same situation!

Regards
Philip

 

If any of you guys could e-mail me the instructions as well. I think i have it figured ouut by laying out the pipes on my living room floor but would like to double check myself. On a side note should have seen the look the future wife gave me when i was doing all this.

Ryan

 

Ryan, PM me an email address that can accept 2.5Mb email for you and I'll send it.