I have the EU but have a flashed ECU. I am taking timing off the flash in higher boost to run very conservative timing. My question.....Does the logger's timing number show the outputted timing from the computer then you apply the retard to get what the timing was at that spot or does it show the timing with the retard already applied. Example say at 6000rpms it shows 17 degrees of timing and then a retard of 2 degrees. Did it output 17 degrees or 15 degrees(17-2=15)????? Sharif??????

 

On the logger, you will get the final timming. If it says 17 @6000 rpm is 17, for example, if you go on the "ign adj map" and take -2 @6000 then on the logger you will see 15@6000.

 

Thanks fito. That's what I thought.

 

Exactly correct.

 

Thank you Sir. I was hoping to get confirmation from you.

 

WHAT YOU DON'T BELIEVE ME! Sharif's word is better than mine!







nahh just kidding!

 

You know I give you mad props to you and your boys for running sick times!!!! It's just good to hear it from more than one person.