I know crazy huh...see all the dumb *** s hit talkers in the comment section...

 

maybe if you posted some dyno charts, and a 1/4 mile run it would give them less to question.

 

Just talked to Marin....he ran an R1 from 60 to 180 and pulled on it... Crazy S hit....

 

I agree that vid isn't that impressive...more to come...

 

An R1 will not hit 180mph - you guys need to settle down a bit...

 

Man, those comments make me want to punch someone...

frickin morons

-TODD

 

wait did i miss something, theres a vid of bigbri's car in it's current state?

 

don't forget about this 350Z.

https://my350z.com/forum/showpost.ph...8&postcount=20

I believe he has a full interior as well.

 

What ever happen to the dynos for that car? Did they ever get posted...?

 

I never saw them, but those numbers are not hard to believe with the list of mods.

Darton Sleeves
But there not 100mm pistons
Pauter Rods
Ferrera set up
Tomei Cams
Wastegate Dumps
HKS V-PRO
Fuel Cell
Weldon External Pump
ATS Clutch
SGP Cooling System Upgrade

As for the throttle body we had bad luck on another 350Z, so we were working on the stock one. It’s not ported, but thanks to a little R&D, and a little help from our good friend Jon from HKS, we did a little something something.
The Pistons are 98mm custom made CP's. The turbos were reworked because we didn’t have any luck on TDO6 20 Gs.

 

Not to stir the pot (as I know this is a 350Z forum), but we should clarify that we're talking about Z33s, and not including earlier generations of Zs (Z32s, Z31s, 280zs, 260, 240s). Also, I assume we mean fastest highway roll-on cars, not drag or road course.

I'm all about fast Zs (all generations), but claims of "fastest street/full interior" "Z" are a bit silly without any data but one dyno run and without poling the entire US tuner market. I know it's fast - enjoy it, and keep out of trouble with it. =)

Cheers,
SS

 

my post was edited to say 350z and not Z.



I don't think even if you polled the entire US tuner market would the data be 100% correct. There's no way of being able to poll every single highly modified 350Z or G35 in the US as there will be the cars built outside of shops.

 

He better have, they aren't that fast. I mean they are fast but with the power Marin is making he should of killed it.

I raced 1 R1 and i don't know what year but he had a hard time keeping his front wheel down and he had me by about 3 or slightly more car lengths. The 600's are too easy, I was on my way back from the gym last night and a pack of three bikes were ahead 2 of them had small passengers and 1 suzuki didn't. The suzuki could not catch me from 70-130mph. I just redyno'd today and my power is wayyyyyy down, i think the Final Drive affected it a lil. So I know he should just be crushing these bikes.


Oh yeah and the hell with the haters on the damn net, they are too stupid to figure anything out. They are hoping to get 300whp and break 13's this year so that goes to show you. When they shop for tires that can't even fit on our fronts they shouldn't even be talking. Let the grown-ups speak and go sit at the kiddy table.

 

YES!

 

We'll I'm going off what I was told...the guy on the bike said he hit 188mph...And the bike is in the 9 sec range...so that is right on with our power level...it was a brand new bike...05 R1 The guy riding it weighed 140lbs...

 

I was talking about Z33's....

 

I bet it's quick...

 

On my 05 R6, My speedo always reads high, so if that guy saw 188, it probably was actually around 180.

Plus with the Power Commander I believe you can get rid of the speed limiter.

 

Take my word on it; unless the bike had some pretty serious mods, he wasn't going 180mph... VBOX is the only true way of getting an accurate reading at those speeds. Bikes do tend to be 6-10% optimistic on the speedo readings. A 2005 R1 should be good for mid 170's - so I bet you guys were definitely hauling ****!

 

Brian its cool today, probably wont be like this again for a long time, lets meet up tonight and get some quality fly by's, and 3-4 gear pulls....

BTW, for fun on the highway, I dropped it in third about 65 mph, was somewhere above 4000rpm, and punched it. Yeah it pulled pretty quick....to like 85 lol, not no 130! I think I want to record what my third gear pull likes like for comparison. call me if your free, peace bro.