Does anyone have this set up?
May 14, 2006 | 01:56 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
Does anyone have this set up?
- carillo rods
May 15, 2006 | 02:28 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
or anything similar to it??????
May 15, 2006 | 03:02 PM
Joined: Jul 2004
Posts: 252
Likes: 0
From: St. Pete, Fl
A lot of people have very similar setups.
May 15, 2006 | 03:11 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
Thanks. Am a bit worrie, i don't want to get less than what i expect out of it. And there is no good shops that can tune Z's in Jax.
May 15, 2006 | 03:19 PM
Joined: May 2005
Posts: 7,146
Likes: 0
From: Jersey, New
those injectors are an over kill.. if the injectors too big you can have problems idling.
May 15, 2006 | 03:28 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
Can i put 600++ whp with this set up?
May 15, 2006 | 03:42 PM
Joined: Dec 2002
Posts: 486
Likes: 0
From: TN
May 15, 2006 | 03:53 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
Thanks, i will be the first Z here in jax with those numbers. I know to the west coast thats nothing.
May 15, 2006 | 03:56 PM
Joined: Nov 2004
Posts: 4,328
Likes: 0
From: Miami, FL
Quote:
Originally Posted by z33boi
I don't see why not
He's going to have to flash the ECU and have the injectors scaled to 750's in order to get them to work with the EU.
May 15, 2006 | 03:57 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
even with the ultimate e-manage?
May 16, 2006 | 10:21 AM
Joined: Jul 2004
Posts: 252
Likes: 0
From: St. Pete, Fl
I would just bite the bullet and ship your car to SGP or Sharif.
May 16, 2006 | 12:55 PM
Joined: Nov 2004
Posts: 4,328
Likes: 0
From: Miami, FL
Quote:
Originally Posted by G350ZTT
even with the ultimate e-manage?
Yes because you won't be able to scale such large injectors without flashing the stock injectors.
May 16, 2006 | 04:13 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
How much does it cost to get it flash and who do you recomend? Thanks!
May 16, 2006 | 05:05 PM
Joined: Nov 2004
Posts: 4,328
Likes: 0
From: Miami, FL
Quote:
Originally Posted by G350ZTT
How much does it cost to get it flash and who do you recomend? Thanks!
about $600. AAM did my flash. I am running rc750's and my ecu was flashed for 650's.
May 16, 2006 | 06:19 PM
Joined: Jul 2004
Posts: 2,780
Likes: 0
From: Albuquerque, NM
Quote:
Originally Posted by G350ZTT
Can i put 600++ whp with this set up?
address the head studs: get the L19 from sharif...that will be cheap insurance on not having to pull the motor in a few months and then do it anyway
May 18, 2006 | 05:58 PM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
The motor is already built and ready to go in the car. Is the head studs something that i can do without taking the motor out?
May 18, 2006 | 06:10 PM
Joined: Jul 2004
Posts: 2,780
Likes: 0
From: Albuquerque, NM
Quote:
Originally Posted by G350ZTT
The motor is already built and ready to go in the car. Is the head studs something that i can do without taking the motor out?
you can, but not without some work... because the studs are located under the cams...and to get out the cams you must pull the timing cover off...
May 20, 2006 | 08:11 AM
Thread Starter
Joined: Mar 2006
Posts: 109
Likes: 0
From: VaBeach
On labor, how many hours will it take?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hajwoj
Autocross/Road
27
Nov 1, 2015 05:25 PM
MicVelo
NorCal Marketplace
9
Oct 4, 2015 07:55 PM
Does anyone have this set up?
