Does anybody know how many volts the inline fuel pump on the vortech kits runs on?????

 

Might show it in the manual

 

no it doesn't but it seems that the fuel pump isnt turning on, and everything is hooked up corectly.

 

Is this on a new kit install ? Used kit ? Your settings in the SS box may not be right . The settings need to be set up right for it to come on at a set rpm and or boost setting

 

this is a used kit install. bought from GMZ

 

The pump runs alternator voltage (switch power)...12-14.5 volts. It is triggered on and off by the Split Second box.

 

Justin do you have a fuel pressure gauge?

 

Yep --Pressure is not determained by voltage but it HAS to have at least 12 Volts

 

no i do not have a fuel pressure gauge, but seems that there is no voltage going to the pump which could be why its runnning so lean. before the boost comes on below 4000 rpms the a/f is in the 10's, and after 5000 it runs lean.

 

I think I remember some one had the wires mixed up going to the pump . I would check that first . There also is a inline fuse...check that to.