Which Oil cooler and Radiator that doesnt require modification to be used with the TN 6MT kit.



Peace.

 

well, I used the instructions for a custom setup someone posted on another board and linked to....using an Earls cooler with Mocal sandwich plate and Aeroquip lines and fittings. run a search for it.

 

I made my own setup with help from other members. Hope it helps.
https://my350z.com/forum/showthread....cooler+install

 

I agree a DIY oil cooler is the most cost effective solution. In regards to the radiator I have my eye on the PE one.

 

Im have a stillen oil cooler kit and it works fine, and their was no custom modifying needed.(besides the location of the oil cooler) I also just purchased the slim radiator from koyo so hopefully it fits, ill know in about 2 weeks.

 

this is the exact same one I did, it's working great

 

B&M OIL COOLER AND KOYO RADIATOR 53MM WHICH IS GOOD,ask sharif for it,i bought it from him and works with my AT without mod for fan