ATTN Vortech 3.12 pulley owners...
Originally Posted by Audible Mayhem
its hit or miss booger, i swear that the plate that everything mounts on isnt the same for all vortechs, some belts go on way easier than others with the same setup.
I would think that most prople with 3.12 pulleys should be fine with the 93 inch belt, but for those that have slipping issues with the 93 inch NAPA then the 92 7/8ths may be the solution.
Originally Posted by Gilley
You may be onto something because my 93 inch NAPA belt that you installed on my 3.12 pulley isn't overtightened and doesn't slip, even on the 3rd dyno pull yesterday in the 93 degree heat.
I would think that most prople with 3.12 pulleys should be fine with the 93 inch belt, but for those that have slipping issues with the 93 inch NAPA then the 92 7/8ths may be the solution.
I would think that most prople with 3.12 pulleys should be fine with the 93 inch belt, but for those that have slipping issues with the 93 inch NAPA then the 92 7/8ths may be the solution.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM
seagrasser
Zs & Gs For Sale
6
Oct 11, 2015 03:27 PM
