Official STS Rear Mount Turbo Discussion Thread
#2461
New Member
iTrader: (1)
Join Date: Jun 2008
Location: wichita,ks
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
wow no body has posted on here for awhile anything new to your systems yet guys i still haven't installed my kit yet from goose goose not until i get back from the desert huh can't wait but i'm about to install a authentic nismo v3 front bumper with nismo sides and ings rear
#2463
Registered User
iTrader: (4)
Whats up guys. My new build should be done here shortly, it has to be ready for a Show/event in Dec. We hit a few snags along the way, and when the car is debuted you guys will see why. Its coming along and is gonna be pretty bad ***. Sorry for the delay on the reveal, it will be worth it.
Unfortunately, I'm back over here in this **** hole country, so i won't even get to be there for the event. Maybe some of you guys can go and tell me what you think of the final product. The car will be posted on here prior to the show/event.
Later fellas
Unfortunately, I'm back over here in this **** hole country, so i won't even get to be there for the event. Maybe some of you guys can go and tell me what you think of the final product. The car will be posted on here prior to the show/event.
Later fellas
#2465
Registered User
iTrader: (2)
Join Date: Jul 2007
Location: Killadelphia
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Berks HFC
Anyone running HFC without them blowing out? I'm about to switch out my TPs for Berks HFC with my new tune... I can't stand the smell any longer. Are the HFC in danger of blowing out at 8-9 psi?
#2466
New Member
iTrader: (11)
what show/event?
Whats up guys. My new build should be done here shortly, it has to be ready for a Show/event in Dec. We hit a few snags along the way, and when the car is debuted you guys will see why. Its coming along and is gonna be pretty bad ***. Sorry for the delay on the reveal, it will be worth it.
Unfortunately, I'm back over here in this **** hole country, so i won't even get to be there for the event. Maybe some of you guys can go and tell me what you think of the final product. The car will be posted on here prior to the show/event.
Later fellas
Unfortunately, I'm back over here in this **** hole country, so i won't even get to be there for the event. Maybe some of you guys can go and tell me what you think of the final product. The car will be posted on here prior to the show/event.
Later fellas
#2467
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
yes it will blow eventually but then again, I'm back on stock CAT and about 10k+ miles on them without any issue.. Try the xyz pipe with CAT. Goosegoose said he saw a noticable perfomance and the cat is way back so the chance is blowing is reduced.
Last edited by athenG; 09-24-2010 at 06:35 AM.
#2469
Registered User
iTrader: (4)
str8dum1 - Not sure if i'm supposed to say as this project is being kept secret until the car is revealed, but i don't know how the show would give anything away. The Event/Show is PRI (Performance Racing Industries). As of now, the car is scheduled to be in a certain companies booth on display. Pretty Sh1tty that I won't get to be there. Hope someone gets to go check things out.
#2471
New Member
iTrader: (11)
thats cool, i was mainly wondering if it was a show in the carolinas. PRI is in orlando, little too far.
good luck with the project!
good luck with the project!
Did you ask Bobby about it? Not sure if its still there, or if its sold, but we aren't using it now, we had some clearance issues, so something a little more custom was made
str8dum1 - Not sure if i'm supposed to say as this project is being kept secret until the car is revealed, but i don't know how the show would give anything away. The Event/Show is PRI (Performance Racing Industries). As of now, the car is scheduled to be in a certain companies booth on display. Pretty Sh1tty that I won't get to be there. Hope someone gets to go check things out.
str8dum1 - Not sure if i'm supposed to say as this project is being kept secret until the car is revealed, but i don't know how the show would give anything away. The Event/Show is PRI (Performance Racing Industries). As of now, the car is scheduled to be in a certain companies booth on display. Pretty Sh1tty that I won't get to be there. Hope someone gets to go check things out.
#2472
Registered User
Join Date: Dec 2006
Location: Canada
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
#2473
New Member
iTrader: (1)
Join Date: Jun 2008
Location: wichita,ks
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
hey guys does anybody know what kind and size of turbo do the stock sts turbo kits come with cuz i purchased the goose goose turbo and it might be to big right now with my stock engine probably considering more turbo lag. Can anybody help with this.
Precision Turbo 6265 – 62MM Billet Aluminum Compressor Wheel – New Gapless Seals
This turbo was very recently serviced under warranty by Precision Turbo on May 11, 2010. For all intents and purposes it is in perfect condition. This is a Precision 6265 with a 62MM billet aluminum compressor, and brand new gapless oil seals. This unit has a ball-bearing CHRA. It spools faster and makes more power than the standard turbo STS includes with their kits. Precision Turbo rates this turbo at 670HP.
Precision Turbo 6265 – 62MM Billet Aluminum Compressor Wheel – New Gapless Seals
This turbo was very recently serviced under warranty by Precision Turbo on May 11, 2010. For all intents and purposes it is in perfect condition. This is a Precision 6265 with a 62MM billet aluminum compressor, and brand new gapless oil seals. This unit has a ball-bearing CHRA. It spools faster and makes more power than the standard turbo STS includes with their kits. Precision Turbo rates this turbo at 670HP.
#2475
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
hey guys does anybody know what kind and size of turbo do the stock sts turbo kits come with cuz i purchased the goose goose turbo and it might be to big right now with my stock engine probably considering more turbo lag. Can anybody help with this.
Precision Turbo 6265 – 62MM Billet Aluminum Compressor Wheel – New Gapless Seals
This turbo was very recently serviced under warranty by Precision Turbo on May 11, 2010. For all intents and purposes it is in perfect condition. This is a Precision 6265 with a 62MM billet aluminum compressor, and brand new gapless oil seals. This unit has a ball-bearing CHRA. It spools faster and makes more power than the standard turbo STS includes with their kits. Precision Turbo rates this turbo at 670HP.
Precision Turbo 6265 – 62MM Billet Aluminum Compressor Wheel – New Gapless Seals
This turbo was very recently serviced under warranty by Precision Turbo on May 11, 2010. For all intents and purposes it is in perfect condition. This is a Precision 6265 with a 62MM billet aluminum compressor, and brand new gapless oil seals. This unit has a ball-bearing CHRA. It spools faster and makes more power than the standard turbo STS includes with their kits. Precision Turbo rates this turbo at 670HP.
#2476
New Member
iTrader: (1)
Join Date: Jun 2008
Location: wichita,ks
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
oh ok lol. so would yall recommend going back to staight pipes than my kinetix hfc. would turboxs test pipes be good for my application i had them before the hfc cuz of the rasp lol.. but i if need to have them then i will repurchase them. huh i have five more months till my turbo kit is even close to being installed i can't wait!!!
#2479
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
/\ Goosegoose was about too but his motor blew so he didn’t get a chance to install them. I would if someone give them to me for free.. lol J/K If I had the extra cash then I would definitely try it.