When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What are you running to flow enough air for that big thing ? Race car ?
I have a T trim with 2.87 pulley and 7500 red line its done for stroker engine which will be done this winter. All intercooler piping is 3" from blower to throttle body and intercooler is now 14" by 25" 3.5" deep. It is not really needed but it looks and sounds cool.
^want to see pics and vid man! that sounds like a sweet setup.
what kind of boost do you hit at redline? 15psi? more?
Im sure he will hit 13 to 15psi way before his redline . Belt slip will be his problem as it was with me with that setup Serp belt will not turn the blower after a certain psi .
Im sure he will hit 13 to 15psi way before his redline . Belt slip will be his problem as it was with me with that setup Serp belt will not turn the blower after a certain psi .
I have never pushed it since the T Trim as we haven"t driven the car much been just doing car shows. I will post some picks later.
Im sure he will hit 13 to 15psi way before his redline . Belt slip will be his problem as it was with me with that setup Serp belt will not turn the blower after a certain psi .
Your system will be quite different than stock Vortech kit . But if you really try to push the boost , I think you may run across the same problem . At what psi ? I wouldnt know .
When are you and Jeremy going to post up some numbers on the big black turbo ? At least give us a hint of the power it will make .
The turbo itself should be capable of pushing 800-850bhp. Hopefully it'll be on the dyno before the week is over, then we need to build the custom exhaust.
The turbo itself should be capable of pushing 800-850bhp. Hopefully it'll be on the dyno before the week is over, then we need to build the custom exhaust.