Does anybody have a UTEC map for a Vortech they are willing to share with me? I want to get the map on there and make sure I'm not running way lean anymore with all of the recent changes I have made (Walbro, UTEC and 440 injectors). Once I verify it's not running lean anymore it's going to SGP for tuning.

 

Contact Mark at SGP, he'll send you a base map.

 

I'm trying, but I think he is pretty busy today. I want to do some AFR logging this weekend.

 

anybody think the turbonetics base map from the turboxs site would work?

 

sure, my base map from Jeremy at PF was a turbonetics map adjusted for 650 cc injectors. Keep your RPMS under 3,000, your never in boost and shouldn't have any problems

 

You can run your stock ecu just dont make boost!!!!!! keep the revs low

 

Lady Jax, the map works good I am seeing 12-12.5 in the upper RPMs @ 7psi, which is much better than I was before. I figure I'm running a little lean with your map because my injectors are 100cc's smaller. Now I feel comfortable brining it in for a tune.

Thanks again for your help!!!

 

did you ever do anything about the fuel regulator in the tank, or your just running it stock with the 255 fuel pump.

 

guys i also need a base map for my vortech setup
(wallbro 255, 2.87 pulley, 650 cc)

10x!

 

nope, I didn't make any modifications to the fuel pump regulator.

 

ok, cool thats good to know. yeah im going to end up ditching the unichip and fmu. to much headache to get it tuned, closes shop for me is 2 hours away. i wish i would of got the tuner kit too now.