Vortech SC: back to stock???

Reply Subscribe

Thread Tools

Search this Thread

Dec 10, 2007 | 07:53 AM

G Thizzle

Thread Starter

Registered User

iTrader: (3)

Joined: Apr 2005

Posts: 687

Likes: 1

From: San Antonio TX

Vortech SC: back to stock???

Might be going back to stock soon. I have a the walbro 255 and also my FPR has been modified for the SC... will i need a whole new stock fuel assembly or will the 255 and modified FPR be fine on a N/A car? I know for the most part everything else is just bolt on and my UTEC just needs to be unplugged... thanks in advance!

Dec 10, 2007 | 08:01 AM

Cux350z

hatersgonnahate

iTrader: (162)

Joined: Apr 2005

Posts: 15,393

Likes: 1,087

From: Greenville, SC

should be fine with the fuel bucket assembly.

what you should be concerned with is the hole in your block for the oil return. Itll need to be fixed or the pan replaced. That is, if you had the return installed there. Ignore this issue if you used an oil pan spacer.

Dec 17, 2007 | 06:51 AM

G Thizzle

Thread Starter

Registered User

iTrader: (3)

Joined: Apr 2005

Posts: 687

Likes: 1

From: San Antonio TX

Quote:

Originally Posted by Cux350z

what you should be concerned with is the hole in your block for the oil return. Itll need to be fixed or the pan replaced. That is, if you had the return installed there. Ignore this issue if you used an oil pan spacer.

I did drill into the block for the oil feed line... can that be plugged? I am hoping so unless Vortechs instructions are for keeping the kit on FOREVER....