teflon tape, grease or other?
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2003
Posts: 1,648
Likes: 0
From: Port Orchard, WA
The fitting that goes into the block and connects to the oil feed line is still leaking. Not sure if I want to attempt to tap it again or leave it be. Drove around for 15 minutes and saw a drop collecting after I parked.
Originally Posted by redline350ZZ
The fitting that goes into the block and connects to the oil feed line is still leaking. Not sure if I want to attempt to tap it again or leave it be. Drove around for 15 minutes and saw a drop collecting after I parked.
make sure you RTV it up pretty good, also put some on the outside of the fitting where the hose clamps down on. just put a little bit there.
i would also put a little extra around the fitting where it thread in after you thread it in for extra protection from leaks.
make sure you let it dry for a while and then put the oil back in.
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2003
Posts: 1,648
Likes: 0
From: Port Orchard, WA
I found a couple metal shavings and RTV in the screen filter of the oil pump pickup or whatever you call it. It was halfway throught so good thing I pulled it apart I guess, lol.
Thread
Thread Starter
Forum
Replies
Last Post
