VSV for 2 stage boost control
08-18-2008 | 09:49 PM
#1
Thread Starter
CJ Motorsports
iTrader: (21)
Joined: Apr 2003
Posts: 3,997
Likes: 3
From: West Chicago, IL
VSV for 2 stage boost control
i am using the EVC4 I believe. I dont see any features for 2 stage control or scramble boost.
I was thinking perhaps I could wire a vacuum switching valve from some factory application on a switch so I can basically have a vacuum line that i can open on a switch that bypasses the EVC solenoid and runs the boost at wastegate level, then flip the switch over in 3rd gear or whenever.
anyone? perhaps there are already aftermarket products intended for this very thing... which is working with the boost controller you already have rather then changing it out.
I was thinking perhaps I could wire a vacuum switching valve from some factory application on a switch so I can basically have a vacuum line that i can open on a switch that bypasses the EVC solenoid and runs the boost at wastegate level, then flip the switch over in 3rd gear or whenever.
anyone? perhaps there are already aftermarket products intended for this very thing... which is working with the boost controller you already have rather then changing it out.
Last edited by phunk; 08-18-2008 at 09:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
350Z Project X
Suspension
9
10-10-2015 09:23 AM
