turbonetics or vortech. . daily driver???
#21
and this is something i am taking into consideration, since i don't wanna deal with worrying about getting it inspected when that time comes. . turbonetics guys please tell what engine lights you have gotten and why and how you are getting inspected when the time comes. . like i said i would be running a utec so i don't know if it would throw codes or not besides the cats not being there which i would just get defoulers.
#22
Registered User
iTrader: (4)
Join Date: Oct 2007
Location: Columbus
Posts: 1,304
Likes: 0
Received 0 Likes
on
0 Posts
and this is something i am taking into consideration, since i don't wanna deal with worrying about getting it inspected when that time comes. . turbonetics guys please tell what engine lights you have gotten and why and how you are getting inspected when the time comes. . like i said i would be running a utec so i don't know if it would throw codes or not besides the cats not being there which i would just get defoulers.
#23
Registered User
iTrader: (6)
Join Date: Jan 2006
Location: waukegan
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
7.2psi is all we could get out of it on the Dyno.Besides I had a boost leak on the MAF housing. My timing is a little high that's how I got those high TQ's . Running the Snow Meth Stage II kit 50/50 mix it helps out a lot with the TN high Air Intake Temps. Using a EBC now and retuned it myself for 10psi pulls hard as hell. WOT in 3d is immediate wheel spin. Need to get it back to Auto Motion for Charles to tweak it and see what I'm putting down.
#26
and this is something i am taking into consideration, since i don't wanna deal with worrying about getting it inspected when that time comes. . turbonetics guys please tell what engine lights you have gotten and why and how you are getting inspected when the time comes. . like i said i would be running a utec so i don't know if it would throw codes or not besides the cats not being there which i would just get defoulers.
If you go with injectors larger than 500cc on either kit with a Utec, you will get the hot start issue, meaning you have to pump the pedal to start the car after it is warm. This is not a big issue, but can be slightly embarrasing if people are checking your car out and you attempt to start it and it doesn't turn over.
Lastly, if you have an '05 or newer, you are almost gauranteed to get CELs. I have read every thread I could find on this topic and there is no single 100% fix for the CELs. Each car needs to find the right mix of O2 sensor placements and possible non-foulers (if you have cats or not) to make it not throw O2 codes, but you may still get the misfire code. Like I said before, the power you want is in the TN Single you have, but the issue for you is emissions inspection.
#27
Registered User
iTrader: (6)
Join Date: Jan 2006
Location: waukegan
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
different dyno's different numbers man. . u got turbonetics, got any codes thrown from it? runnin reflash, different ems? any input?
#28
really seems like some people get codes thrown and some don't like a luck of the draw thing. . i have a 03 if that matters, and the misfire codes and rich/lean codes seem like it would be in the tune. . if there is a good tune it doesn't seem like you should get codes, and as far as hot start issues, not everyone is getting that and it is def. not because of going over 500cc injectors with a utec i have talked to many people who are running big injectors with utec and don't have the problem. . seems to be in the tune and have to deal with fuel pressure, but mostly in the tune.
#30
Registered User
iTrader: (35)
Join Date: Nov 2007
Location: louisvile KY
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
really seems like some people get codes thrown and some don't like a luck of the draw thing. . i have a 03 if that matters, and the misfire codes and rich/lean codes seem like it would be in the tune. . if there is a good tune it doesn't seem like you should get codes, and as far as hot start issues, not everyone is getting that and it is def. not because of going over 500cc injectors with a utec i have talked to many people who are running big injectors with utec and don't have the problem. . seems to be in the tune and have to deal with fuel pressure, but mostly in the tune.
#31
New Member
iTrader: (6)
Join Date: May 2006
Location: Ft. Wayne, IN
Posts: 1,156
Likes: 0
Received 0 Likes
on
0 Posts
My 2cents...
I don't have either, but I am running a Procharger. I had the same debate as you when I was going FI...and my car is my daily driver as well...so I wanted it to be reliable. I think everyone is right when they say you will feel faster with the TN kit. However, I can tell you that the guys who tuned my car (Injected Performance...Hal in particular) were shocked at the horsepower the Procharger put down. If I remember right, he had run the TN kit on his car for a while and was running 330-350 rwhp on a Dyno Dynamics....granted, w/ much more mid-range torque than my Procharger...but I did end up with 378rwhp on my procharger at 9psi (on the same Dyno Dynamics).
Initially, I was somewhat sad that I didn't have that midrange torque...however...after driving it for a while now...here are some things to think about. What is your "use case", if you will. Daily driver right? So are you going to be tracking it? Are you going to be doing many high speed runs? I know I don't. I flog my car daily. At low speeds. And trust me...the procharger is powerful enough to have traction issues (in the low-midrange) in 1st and 2nd gear...sometimes even 3rd if i slam gears. And this is with boost coming on linearly. I can only imagine that with turbo boost, you are going to have hella-issues with traction at low speeds!!! fun? of course. does it fit your use case? I dunno.
Another thing to consider...superchargers are generally gonna require a bit more fuel than their turbo counterparts at the same psi. like I said, i'm at 9psi, and I'm running Deatshewerks 600cc injectors mated to a Walbro 255lph in-tank with NO return fuel system...and I'm around 85% or so on those injectors already (once again, if i remember correctly).
So...that's just some info to mull over. In the end, i'll either be huge single turbo, or some twin turbo...on a built motor....when the car is no longer my daily driver. For now...I love the power the car has....the response is great...it's very manageable (my fiancee drives it all the time)...and (cross my fingers) I have haven't had any issues yet. I DO, however, throw the CEL light frequently...due to timing issues...common problem...I just deal with it as we don't have inspections here in Indiana. However, you could sacrifice some horsepower...run stock, or closer to stock, timing...and avoid that issue as well.
P.S. Jay'Z is selling a procharger kit right now if you have any interest
GOOD LUCK!!!
I don't have either, but I am running a Procharger. I had the same debate as you when I was going FI...and my car is my daily driver as well...so I wanted it to be reliable. I think everyone is right when they say you will feel faster with the TN kit. However, I can tell you that the guys who tuned my car (Injected Performance...Hal in particular) were shocked at the horsepower the Procharger put down. If I remember right, he had run the TN kit on his car for a while and was running 330-350 rwhp on a Dyno Dynamics....granted, w/ much more mid-range torque than my Procharger...but I did end up with 378rwhp on my procharger at 9psi (on the same Dyno Dynamics).
Initially, I was somewhat sad that I didn't have that midrange torque...however...after driving it for a while now...here are some things to think about. What is your "use case", if you will. Daily driver right? So are you going to be tracking it? Are you going to be doing many high speed runs? I know I don't. I flog my car daily. At low speeds. And trust me...the procharger is powerful enough to have traction issues (in the low-midrange) in 1st and 2nd gear...sometimes even 3rd if i slam gears. And this is with boost coming on linearly. I can only imagine that with turbo boost, you are going to have hella-issues with traction at low speeds!!! fun? of course. does it fit your use case? I dunno.
Another thing to consider...superchargers are generally gonna require a bit more fuel than their turbo counterparts at the same psi. like I said, i'm at 9psi, and I'm running Deatshewerks 600cc injectors mated to a Walbro 255lph in-tank with NO return fuel system...and I'm around 85% or so on those injectors already (once again, if i remember correctly).
So...that's just some info to mull over. In the end, i'll either be huge single turbo, or some twin turbo...on a built motor....when the car is no longer my daily driver. For now...I love the power the car has....the response is great...it's very manageable (my fiancee drives it all the time)...and (cross my fingers) I have haven't had any issues yet. I DO, however, throw the CEL light frequently...due to timing issues...common problem...I just deal with it as we don't have inspections here in Indiana. However, you could sacrifice some horsepower...run stock, or closer to stock, timing...and avoid that issue as well.
P.S. Jay'Z is selling a procharger kit right now if you have any interest
GOOD LUCK!!!
Last edited by SweetDreamZ; 12-10-2008 at 08:50 AM.
#32
Yes, turbonetics kit. No codes whatsoever, I am running a reflash, however its not the turbonetics reflash, the shop that did the install have their own reflash. I have a motordyne 5/16" iso thermal copper plenum spacer, 3" exhaust. Im pretty pissed about those numbers, I would like to see at least 400 to the wheels from this kit. Maybe Ill add a thread and post my dyno sheet and see what people think....
If you have 550cc and up you will have hot start problems. It's not a big deal you get used to it. Just bump the throttle at start
and as far as hot start issues, not everyone is getting that and it is def. not because of going over 500cc injectors with a utec i have talked to many people who are running big injectors with utec and don't have the problem. . seems to be in the tune and have to deal with fuel pressure, but mostly in the tune
really seems like some people get codes thrown and some don't like a luck of the draw thing. . i have a 03 if that matters, and the misfire codes and rich/lean codes seem like it would be in the tune. . if there is a good tune it doesn't seem like you should get codes
#33
Registered User
Join Date: Jan 2008
Location: Winterpeg
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
If the re-flash is custom, do you know if they have it set so that the CEL does not turn on for specific codes. This would be similar to other re-flashes that are available - its not that the car isn't throwing codes, its that the stock ECU is told to ignore them. Problem is, if you are in a state that plugs directly into the OBD port for emissions the reflashed sensors come up as pending and you can fail anyhow.
+1 - thats what I'm saying
I disagree and think that maybe you are mis-informed. The Utec cannot scale injectors at startup and when you get larger injectors the hot start issue occurs. My car started fine when it was hot when all I was running was 440cc injectors and the TN reflash.
Codes are luck of the draw, the 04.5 and newer cars seem to throw codes more often. I cannot say if the codes could be tuned out (I doubt they can), but I am tuned for power and my car runs great. I am Function:Tuned and don't believe my tune is related to the CELs at all. I could move around the O2 sensors and look into non-foulers, but at this point I'm just going to title my car in Florida so I can throw more lights than a Christmas tree.
+1 - thats what I'm saying
I disagree and think that maybe you are mis-informed. The Utec cannot scale injectors at startup and when you get larger injectors the hot start issue occurs. My car started fine when it was hot when all I was running was 440cc injectors and the TN reflash.
Codes are luck of the draw, the 04.5 and newer cars seem to throw codes more often. I cannot say if the codes could be tuned out (I doubt they can), but I am tuned for power and my car runs great. I am Function:Tuned and don't believe my tune is related to the CELs at all. I could move around the O2 sensors and look into non-foulers, but at this point I'm just going to title my car in Florida so I can throw more lights than a Christmas tree.
#34
It differs, but I would say that it is 9psi or less on a stock motor. I do not know what the max psi is for the TN kit because most will say the if you are building the motor the TN kit is not your best route. I think that it will max out at appx 450ish whp on a DJ, but someone like spoilsofwar may know for sure.
#35
wouldn't be so into what psi rather than the power level the car is making both horsepower and torque and air fuel. . but to guess id say stock block wouldn't want much more than 10psi but all depending on what else is done to the car and tune...anyone else have any input on throwing codes with the kit, this is basically whats holding me up. . i will need to pass nys emissions and like i said not worried about having no cats i will get defoulers, but misfire codes and such i need to hear about.
#36
Registered User
iTrader: (6)
Join Date: Jan 2006
Location: waukegan
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
drew whats the shop called that did your reflash, must be inhouse custom reflash or somethin?
If the re-flash is custom, do you know if they have it set so that the CEL does not turn on for specific codes. This would be similar to other re-flashes that are available - its not that the car isn't throwing codes, its that the stock ECU is told to ignore them. Problem is, if you are in a state that plugs directly into the OBD port for emissions the reflashed sensors come up as pending and you can fail anyhow.
You might see a thread about it soon....
It differs, but I would say that it is 9psi or less on a stock motor. I do not know what the max psi is for the TN kit because most will say the if you are building the motor the TN kit is not your best route. I think that it will max out at appx 450ish whp on a DJ, but someone like spoilsofwar may know for sure.
Last edited by drewk; 12-10-2008 at 04:42 PM. Reason: b
#38
Registered User
iTrader: (35)
Join Date: Nov 2007
Location: louisvile KY
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
If you want more power out of your TN kit. https://my350z.com/forum/product-ann...nterest-8.html
Last edited by frankie945; 12-10-2008 at 05:15 PM.
#39
Registered User
iTrader: (28)
Join Date: Apr 2007
Location: NEW YORK
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
wouldn't be so into what psi rather than the power level the car is making both horsepower and torque and air fuel. . but to guess id say stock block wouldn't want much more than 10psi but all depending on what else is done to the car and tune...anyone else have any input on throwing codes with the kit, this is basically whats holding me up. . i will need to pass nys emissions and like i said not worried about having no cats i will get defoulers, but misfire codes and such i need to hear about.
#40
ny state does the computer diagnosis on all cars 92 and newer i believe. . i know for a fact where i am in ny they do inspection on the z cause i have already had to. . i just gotta figure out if i will have lights on from the kit and what i can do to get around it