I'm trying to remove the Vortech auxillary pump, fmu, etc. I bought a utec, injectors, and a walbro. I installed the kit myself.

I can't remove the Vortech fuel hoses. Specifically, I can't remove the Vortech fuel line that attaches to the metal oem line from the fuel tank. It's a round metal connector with no release tabs. It's a female connector that connects to the male oem line.

Anyone know how to remove this line?

 

Fuel disconnect tool that can be found at pepboys.

 

Exactly and there not expensive at all.

 

ya that female fuel connector is a mother EFFer. unless you have the right tool. go get a fuel line disconnect tool, just like everybody else said so far.

 

i used a flat head screw driver...pushed the 2 tabs in and pulled the line loose

 

Just get the proper tool; it's only a couple of dollars.