All Greddy TT owners perfect K&N filter replacement part #
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Brick
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
All Greddy TT owners perfect K&N filter replacement part #
hey guys i found the perfect K&N filter to replace the stock Greddy units. These are great filters and fit perfectly in the engine bay. Heres the link http://store.knfilters.com/search/pr...x?Prod=RU-3390
Dont risk getting your turbos filthy with the stock greddy filters.
Dont risk getting your turbos filthy with the stock greddy filters.
#2
Registered User
iTrader: (8)
that one may fit perfectly, but it doesn't offer alot surface area and could be a restriction. even though, it is similar in size to the greddy mushrooms, those mushrooms will outflow that filter by a large margin. WHat does K&N say as far the airflow/HP maximum for those filters.
i went with these on my setup, but I also moved the filter locations via some additional piping. it is hard to tell from the pictures, but these filters are just as wide (base diameter) as those shorties in the pic above. the shorties have a 5.8XX" Diameter, while these have a 6" base diameter. :
If you don't mind altering the pipes, you can get some good sized filters in there.
i went with these on my setup, but I also moved the filter locations via some additional piping. it is hard to tell from the pictures, but these filters are just as wide (base diameter) as those shorties in the pic above. the shorties have a 5.8XX" Diameter, while these have a 6" base diameter. :
If you don't mind altering the pipes, you can get some good sized filters in there.
Last edited by QuadCam; 02-15-2009 at 01:56 PM.
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Brick
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Im not sure what they flow so i cant compare them to the greddy. I will have to email K&N. The ones you got look good i just wanted to keep the stock filter location with no additional modifications. I have not noticed any kind of air restriction the car seems to preform exactly the same except my turbos are much cleaner.
#6
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Brick
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
^^ very nice setup man...i really like the blackedout engine and attention to detail, very clean. Did you have to modify the intake pipes to fit those filters they look huge!! heres a pic of my car taken today
Trending Topics
#8
The Untouchable
iTrader: (58)
Join Date: Jul 2005
Location: Milwaukee
Posts: 1,960
Likes: 0
Received 0 Likes
on
0 Posts
they have the same inlet as the intake pipes...u can either cut the pipes back....or just push it back a bit into the intake piping...wont hurt anything....way more intake surface....sucky sucky!
#20
Registered User
iTrader: (9)
Link to other K&N Thread.
Alberto sounds like you hate your car, Im guessing the problems never end
https://my350z.com/forum/forced-indu...-tt-setup.html
Alberto sounds like you hate your car, Im guessing the problems never end
https://my350z.com/forum/forced-indu...-tt-setup.html