I am putting in my order tomorrow for the HKS CAMP system to monitor Exhaust Temp, Boost, and Fuel pressure...is there something else I am missing? Is there any way with the CAMP system that I can monitor if my fuel is going too lean? Even after installing my own Procharger I am still a novice so any input would be great! Most of my posts have been questions (for that I apologize) but you guys have been more than helpful. Thanks you!
Dan

 

What monitor do you plan to use to view these readings? Where are you going to put it? I have Nav and have been wondering if the CAMP system would work with it. Please keep us informed.

 

Definitely keep us informed.

I'm thinking about it.

 

what screen are you using for the CAMP system? what connection does the CAMP system use to output video?

 

I already have a monitor installed in the Nav spot, the Panasonic CY-VM5800U. The CAMP utilizes the audio/video inputs in amy monitor....it comes with a remote and remote sensor to change settings. Here is the link...

http://www.hksusa.com/products/?id=651

 

Im taking it that you are wondering if there is a air/fuel monitor on the camp system and as far as i know the answer is no. I didnt think anyone else even knew about the camp ive been lookin at it for 2 years and still have been unable to find anyone with it installed. Dont forget you need the harnesses for boost and fuel press and also the junction box.

 

Give these guys a call ask for Chris

www.scienceofspeed.com

They have had them installed on there NSX'S

They can answer any question you might have

parker

www.iptmotorsports.com

 

http://www.scienceofspeed.com/produc...ducts/NSX/HKS/

 

redlinez...
I had wondered the same thing and posted the question in another thread. I was told the factory Nav uses a different type of video connector/feed so the HKS Camp will not work directly with it.

There is a chance you could put some type of line adapter for it to work, but I have no idea whether this would be an off the shelf item or something you have to fabricate.

let me know if you find a way to do it and I'll do the same because I'd rather run the Camp through the factory LCD screen than add a second screen elsewhere in the cockpit.

 

Adaptor for factory nav

you can find at

www.navtv.com

call the and they will point you to a retailer that has it in your area

it is exspensive like 800.00 last i checked

one guy has it here on the board

name

abyiss

i think

parker

 

yeah InternetAbyss aka Jason has the NavTV, I believe he was the first.

Victor

 

Thanks! I will give him a call.

 

There is no A/F monitering option for the CAMP - closest you can get is EGT but even that can be very misleading in terms of reading A/F without other info (timing, etc.)

Best bet overall would be a wideband 02 sensor...something along the lines of the FJO setup, works very very well

Also sent you a PM about the CAMP - we have one set in stock that a customer cancelled


Adam

 

Adam,

What is the FJO setup?

THX!
Cesar