god350z

iTrader: (3)

ok this is my setup im starting in july with the build.
been told i can get to 700whp or close.

Greddy 18g twin turbo kit

JE Pistons 9:8:1 *
Eagle Rods *
Head Gasket *
CJM Return Fuel System
Twin Walbro Fuel Pumps
Mishimoto radiator
Cosworth Intake Manifold
RC 1200cc Injectors
BC Valves & Retainer Kit
BC 272 cams or bigger
L19 Headstuds
ARP Main stud kit
Haltech


I have saved up 5k so far...figured it will be around 10k total...so starting this july and hope to be finished by next march...

coachk

iTrader: (21)

Keep saving, 10k ain't gonna get it...sorry. And yes you can get 700whp from the 18g's

Jay'Z

iTrader: (118)

10k will get you a laugh.. This has been discussed a billion times...

Not to mention you probably have a shop your going to so why not discuss it with them..

XKR

iTrader: (1)

I dont understand....You already have everything on that list plus 5K??? I hope you dont mean that you think you can get everything on that list for 10K

welderz

It's going to be difficult to hit 700whp with the elevation in colorado.

rcdash

iTrader: (18)

That's around to $12-$15k in parts in your list, including the turbo kit. With no labor. No clutch. No brake or suspension upgrade. No gauges. Bare minimum given those parts is $20k if everything goes smoothly. Once you add in the "good to have" ancillary parts, you'll be closer to $25-30k.

god350z

iTrader: (3)

its not 12k for those parts
and labor is free

god350z

iTrader: (3)

I ALREADY HAVE THE TWIN TURBO KIT ON MY CAR
ALREADY HAVE CUSCO LSD AND TEIN FLEX COILOVERS
* = have
Months = purchasing


JE Pistons 9:8:1 *
Eagle Rods *
Head Gasket *
CJM Return Fuel System $1000 =================January
Twin Walbro Fuel Pumps $350 --------------October
Mishimoto radiator $240 -------------------October
Cosworth Intake Manifold - $1000
1000cc-1200cc Injectors $600 *******************July
BC Valves & Retainer Kit (359.99) *************** July
BC 272 cams (989.99) ----------------------October
L19 Headstuds $500 **************** July
ARP Main stud kit $160 *****************July
Haltech $2000 =========January
Oil Catch Can
Samco Hoses
Custom Polished Engine
Twin Disc Clutch $2000 ----------------March

and if i get them used then i save!

kevin8086

iTrader: (5)

what are the 18g's good for on pump gas 93 oct? with a build like that or similar? if you have supporting mods. mo meth or race gas.

god350z

iTrader: (3)

well never built a car at altitude but i would say 550whp-570whp on pump gas...

JAM3Z

iTrader: (17)

Wtf is going on in this thread?

CursedFish

If you're starting in July, I'm assuming you're buying EMU in January and the clutch in March? You will be waiting to have all the parts on hand before you install them all, right?

rcdash

iTrader: (18)

ricer dynoing aka, bench dyno tuning. It's like the tuner version of ricer math or bench racing. We just need to coin a phrase that will roll off the tongue...

god350z

iTrader: (3)

no the engine will get built as i go along...from internals and so on...
march is the deadline...i have a spare vq block...

XKR

iTrader: (1)

Cosworth Plenum for $1000....you cant even get a used one for that price



Raj....when you going to post the updates on event After the event

dikspiel

iTrader: (70)

^fail you can get them shipped from vendors on the forum for that price.

P.S. if you take your car to Mr. S. at RA he can make your car 700hp with just a tune and an ebay turbo kit.

god350z

iTrader: (3)

here you go kid...since i guess you assumed i didnt do research and instead of staying on task you venture off and bs me about a price...

http://www.importpartspro.com/coinmawcaplc.html

i get 15% off this price which is 1100 bucks...

moving right along now...

XKR

iTrader: (1)

Shipping charge is $1000...

dikspiel

iTrader: (70)

go check the engine vendor section...

XKR

iTrader: (1)

KID!!! So I see you know alot..What about the parts you need to get the plenum to fit over the aftermarket injectors??

BTW....does this vendor have them in stock??