Torque Plate. How thick does it need to be?
Torque Plate. How thick does it need to be?
Any ideas what would be the recomended thickness of a torque plate to use for the VQ35. Is 1.5" thick enough?
I would have thought that the plate needs to be thick enough so that only the thread part of the head bolt sticks out past the plate.
Looking at the picuture below would mean the plate needs to be about 60mm thick so that the nuts can torque it down. Or can you use a shorter bolt and hence a thinner torque plate or a spacer between the plate and nut.
I would have thought that the plate needs to be thick enough so that only the thread part of the head bolt sticks out past the plate.
Looking at the picuture below would mean the plate needs to be about 60mm thick so that the nuts can torque it down. Or can you use a shorter bolt and hence a thinner torque plate or a spacer between the plate and nut.
Last edited by MR RIZK; Aug 16, 2009 at 05:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
