anxious to start a thread for my car...
#81
Registered User
iTrader: (14)
Not to off topic, but Carl at 928 Motorsports and I were discussing you and Brandon the other day. We are going to be needing some intake manifold flanges made for you 6.4L 32V Bonneville motor soon and we were thinking about seeing if you guys were interested.
I'll hit you up in a month or so though.
#90
New Member
iTrader: (13)
Originally Posted by u
Looks like it was welded by the same guy who did the RA strut tower bar
....those welds smell like shlt either way
Last edited by IIQuickSilverII; 11-10-2009 at 09:42 AM.
#91
SFZCC
iTrader: (19)
Join Date: May 2002
Location: Lake Worth, FL
Posts: 7,419
Likes: 0
Received 0 Likes
on
0 Posts
I don't know how old the article is but SGP did his original engine about 4 years ago, he has done a ton of work on it since then and I believe that custom intake/intercooler setup he did himself.
he is not on here much but mainly on G35driver, I think his user name is crazyg or something like that
he is not on here much but mainly on G35driver, I think his user name is crazyg or something like that
#94
SFZCC
iTrader: (19)
Join Date: May 2002
Location: Lake Worth, FL
Posts: 7,419
Likes: 0
Received 0 Likes
on
0 Posts
yes it is
I found his thread on his latest engine build including making this plenum http://g35driver.com/forums/sfl-g-cl...ine-build.html
I found his thread on his latest engine build including making this plenum http://g35driver.com/forums/sfl-g-cl...ine-build.html
#95
でたらめ検出器
iTrader: (1)
Besides, I'm mainly interested in Charles' plenum and the potential of his car.
Now, back on topic...
#97
でたらめ検出器
iTrader: (1)
Now, back on topic...
Any updates or progress Charles?
Last edited by RudeG_v2.0; 11-10-2009 at 06:16 PM.
#100
Registered User
iTrader: (8)
Actually.....the welds aren't indicative of quality control on this build. Mike is a "do it all" kind of guy. He wanted to create this setup that he came up with.....so he went out and and bought the tools, the welder, etc.......and he taught himself to weld aluminum. As a novice aluminum welder, it is going to show in the "beauty" of his welds. so what you see was Mike learning to weld. They may not be beautiful, but Mike built his G into what he wanted. I'm sure he would go back and change those welds on the pipes if it really bothered him.
Charles,.....apoplogies for continuing on the off-topic. I love you new setup. I can only dream to have access to all your tools!
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM