is there any product can monitor like wideband this kind of info and also can work with haltech???

 

The CAMP2 works with any car. It plugs into the OBD2 port to get its information. And its a great visual display if you have a display screen in the cubby.

 

The Camp 2 will not monitor Widebands unless it is connected to a Fcon

 

IMO the camp2 sucks............ unless you have an fcon.

 

buy a zeitronix wideband. you can use the white wire on the zeitronix to the wideband on haltech. but, zeitronix does not provide a linear output so you'll have to create a conversion chart for it on haltech like i did. i can copy paste and send you my chart if you need.

 

http://www.plxdevices.com/multigauges.html

Edit: Or you can get a racepak cluster.

 

We run AIM sports dashes for alot of our cars...they are compatable with most stand alone ECU's as well as alot of CAN Bus cars. They show a listing for 05-06 350z can bus as well....

 

There is a Haltech-specific version of the Racepak IQ3. This allows you to view standard Haltech data such as AFR and temps, along with many other features such as additional sensors, shift lights, alarms, etc.

http://www.350zmod.com/SearchResults.asp?Search=racepak

 

You can also run a carPC and use the ECU manager display for dozens of read outs/gauges, the layout of which you can design yourself. I have an active Haltech real time display 15-20 seconds after starting the car (auto connects on resume from standby). Refer to the vid in my build thread (link in sig) for an idea...

 

^rcdash, that is a nice setup. You need to build a few and sell to others

 

Anyone can learn how to do their own setup - just head on over to mp3car.com. It takes some work, but no more or less than anything else in pursuit of modifying the car.

 

Blitz and Magden also make something similar to HKS CAMP2.

 

thanks guys~~PLX multi gauge looks good for me~~

 

Here is one's I was looking at

http://www.arkdesign-us.com/usark-electronic-mfd.php

http://www.blitzperformancesales.com...s/r-vitds.html

 

The one by blitz is pretty cool - I wouldve gone this route instead of the camp2

 

Good if it so easy, you'll love coming over and setting up my p2140

 

Carnetix smart power supply? No problem - that's a nice unit.

The Blitz looks nice, but relying on slow OBDII communication is pitiful. Maybe it supports Nissan specific CAN channels, but I doubt it...

 

^ The Blitz does support Nissan CAN on HRs

Edit: But If you have a rev-up your are SOL with the Blitz unit. Their application chart on their Japanese site only shows product support for non-revup DE, HR and VHR.

 

DashDaq is another Option it will work with haltech and it comes with 2 analog inputs and u can connect it to additional sensors by adding some modules.

GReddy Infometer Touch is another cool option too, it comes with 1 analog input and you can add BOOST,Oil Press,Oil Temp with additional Adapter but if you prefer connecting the device to a monitor ur stuck with Blitz it will accept one Wideband or Pressure and one Temp Sensor, you can get it done by going the complicated CarPC route in the end it will be a cool project but its a little bit costly if u wanna do it right :1