** My build w/ boosted performance ST kit!! - lots of pix! **
#401
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
understandable. with 15+ foot of exhaust piping on the sts kit it might make a difference.
i only use heatwrap to reduce temps around the exhaust. I have yet to find benefits in performance between heatwrap and non-heatwrap on any of my cars or race bikes.
i guess with the right numbers anyone can prove gains on anything though.
i only use heatwrap to reduce temps around the exhaust. I have yet to find benefits in performance between heatwrap and non-heatwrap on any of my cars or race bikes.
i guess with the right numbers anyone can prove gains on anything though.
#408
is it on the dyno yet? updates? u got a smart phone right? we should get like up to the SECOND updates on this... we've all been waitin foreeeevvveeerrrrr! good luck!
#412
#416
This was at 7 pounds... It's a lot better than last time... But it's not holding boost steady even with ebc on.. So it's off the dyno to do a pressure test and smoke test ..n check again . I'll report bak when I have more info... My luck is sucking .. Ugh well see
#418
Vendor - Former Vendor
iTrader: (14)
Either way sounds like progress, those were nice numbers for 7psi.
My car is holding 9psi with the T4 6262 with less duty cycle on the EBC than with the T3 6162.
Last edited by Boosted Performance; 06-07-2010 at 08:34 AM.
#420
Update!!
Got the boost to hold!! Stupid lil things... Peaked at 8.8-9.. And 8.3 by redline... Afr dead on at 11.5... Very very little timing... 386/379 tq... Going to do a couple more but it'll break the 400.
This kit makes great tq!!!! And the iat are perfect and cool
Got the boost to hold!! Stupid lil things... Peaked at 8.8-9.. And 8.3 by redline... Afr dead on at 11.5... Very very little timing... 386/379 tq... Going to do a couple more but it'll break the 400.
This kit makes great tq!!!! And the iat are perfect and cool