FS: APS Extreme Fuel Return System
Thread Starter
Registered User
iTrader: (87)
Joined: Dec 2006
Posts: 942
Likes: 0
From: Lexington, KY
APS Extreme Fuel Return System
Hey guys,
I am selling my old fuel system set-up. It includes the APS high flow fuel rails with brackets, the APS injectors which are rated at 880cc with o-rings. The regulators are 4bar. I am also including the drop in twin pump APS hanger along with two brand new (two days old) walbro 255 pumps. There are also brand new filter socks for the pumps. It is made out of steel, hold two pumps and has the built in Venturi system. The fittings on the rails/regulators are -6AN.
You wil need fuel lines from the pump to the rails. This is not included in the kit. This system uses the stock fuel line as the return line. So you will need two lines from each pump on the hanger to rails and the fittings, that is it.
This set-up was used when I put down 543rwhp and 500ftlb at 16.5psi on Dynosty's dyno which reads low. This would equate to a little over 600 on a DynoJet.
The fuel pressure sensor and gauge are not included.
There is some overspray on the rails which is what the black speckle is from. A quick paint could make these look real nice.
Hanger has two brand new walbro 255 pumps along with brand new filter socks.
I am selling my old fuel system set-up. It includes the APS high flow fuel rails with brackets, the APS injectors which are rated at 880cc with o-rings. The regulators are 4bar. I am also including the drop in twin pump APS hanger along with two brand new (two days old) walbro 255 pumps. There are also brand new filter socks for the pumps. It is made out of steel, hold two pumps and has the built in Venturi system. The fittings on the rails/regulators are -6AN.
You wil need fuel lines from the pump to the rails. This is not included in the kit. This system uses the stock fuel line as the return line. So you will need two lines from each pump on the hanger to rails and the fittings, that is it.
This set-up was used when I put down 543rwhp and 500ftlb at 16.5psi on Dynosty's dyno which reads low. This would equate to a little over 600 on a DynoJet.
The fuel pressure sensor and gauge are not included.
There is some overspray on the rails which is what the black speckle is from. A quick paint could make these look real nice.
Hanger has two brand new walbro 255 pumps along with brand new filter socks.
Last edited by abushong504; Mar 22, 2011 at 06:28 PM.
Trending Topics
Sold to me. Money sent!!! Thanks for the great deal. I needed the twin in tank pumps. I'm runnin a single walboro and at 16-17psi my fuel pressure isn't keeping up with my 1000cc injectors. Thanks bro!!
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM
