FS/FT: Powerlab GT35R Kit, Custom Intake
07-07-2011, 10:18 AM
#81
Registered User
Thread Starter
iTrader: (4)
Join Date: Sep 2010
Location: SoCal
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Only reason I ask is we built something similar for a 68 GTO , on ITBs and boost
http://www.facebook.com/media/set/?s...6.194777241351
I was just looking at it yours and I was like whoa ! flashback
http://www.facebook.com/media/set/?s...6.194777241351
I was just looking at it yours and I was like whoa ! flashback
07-08-2011, 07:38 AM
#82
Registered User
Thread Starter
iTrader: (4)
Join Date: Sep 2010
Location: SoCal
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE: If this doesn't sell by next Friday, 7/15, I will be installing the kit on my car. The absolute lowest I will go on the price is $4,000 shipped (since shipping will be around $200) so please don't send me PM's asking what my rock bottom price is.
07-08-2011, 12:09 PM
#84
Registered User
Thread Starter
iTrader: (4)
Join Date: Sep 2010
Location: SoCal
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Man if I didn't feel so bad about you getting the shaft on that greddy kit, I would have had a witty comeback. But I'm sure your emotions are a bit unstable right now. Hopefully he will do the right thing.Someone stop me from breaking the law and buy this thing before I put it in (thats what she said)!
07-13-2011, 08:22 AM
#90
Registered User
Thread Starter
iTrader: (4)
Join Date: Sep 2010
Location: SoCal
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
^^ Seriously. If it doesn't sell by the weekend it's going in my car and I'll at least have the fastest Z in Orange County until next May when Reg is due...
07-14-2011, 12:28 AM
#91
Registered User
Join Date: Dec 2010
Location: san francisco
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
alright let me share some info since so much people have been contacting me on g35driver.
I'm the original owner of the kit (bokchilo).
*The coolant lines for the stock intake manifold is bypassed, you just get a a straight fitting to connect those.
*The pvc hose that plugs to your stock intake will plug to the back of the manifold on the driver side.
*The bov vacuum hose will plug to the back of the manifold on the passenger side.
*I still do have the original piping if you guys need it, you can pm me for the price.
*This kit is originally made for the 03-05 6mt 350z. Reason why it fit my g35 is because ... i dont know? I ordered it for my 07 g35 coupe and they sent me this kit. The reason why I know that it's specifically for the 350z is because the intake from the turbo looked like this:
whereas the g35 intake is suppose to point down towards the driver side bumper / wheel well area. So yea .. this is technically suppose to be for the 350z.
*if you dont like the WR badge on the manifold then just rip it off. Its mounted with double sided 3m tape.
*It fits your stock hood because its lower than the stock manifold.
*No. I did not run a stock hood. I have a veilside fortune widebody kit
I paid $6300 for the kit itself, $140 for the bov, $1000 for the intake manifold and a whole bunch of other crap. So $4000 shipped is DIRT CHEAP.
I'm the original owner of the kit (bokchilo).
*The coolant lines for the stock intake manifold is bypassed, you just get a a straight fitting to connect those.
*The pvc hose that plugs to your stock intake will plug to the back of the manifold on the driver side.
*The bov vacuum hose will plug to the back of the manifold on the passenger side.
*I still do have the original piping if you guys need it, you can pm me for the price.
*This kit is originally made for the 03-05 6mt 350z. Reason why it fit my g35 is because ... i dont know? I ordered it for my 07 g35 coupe and they sent me this kit. The reason why I know that it's specifically for the 350z is because the intake from the turbo looked like this:
whereas the g35 intake is suppose to point down towards the driver side bumper / wheel well area. So yea .. this is technically suppose to be for the 350z.
*if you dont like the WR badge on the manifold then just rip it off. Its mounted with double sided 3m tape.
*It fits your stock hood because its lower than the stock manifold.
*No. I did not run a stock hood. I have a veilside fortune widebody kit
I paid $6300 for the kit itself, $140 for the bov, $1000 for the intake manifold and a whole bunch of other crap. So $4000 shipped is DIRT CHEAP.
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
