Spark Plugs for TT
10-07-2011, 03:48 PM
New Member
Thread Starter
Join Date: Apr 2009
Location: SoCal
Posts: 275
Spark Plugs for TT
Hey guys so I bought the NGK Iridium IX (1-step colder) spark plugs and wanted to know what I should gap them at. I'm running the Greddy TT 18G on the DE motor, thanks!
10-07-2011, 04:43 PM
Registered User
Join Date: Jun 2006
Location: My Self Created Hell
Posts: 6,334
Likes: 0
Gap should be good as shipped from NGK.
10-07-2011, 05:01 PM
Registered User
Join Date: May 2006
Location: Ottawa
Posts: 1,732
Likes: 0
Agreed, they come gapped.
10-08-2011, 12:30 AM
New Member
Thread Starter
Join Date: Apr 2009
Location: SoCal
Posts: 275
O ok even for FI cars? My local shop said if not the same, a little smaller.
10-08-2011, 03:55 AM
Professional
Join Date: Mar 2008
Location: Northern NJ / Vacation on MARS
Posts: 1,876
Likes: 0
My 1 step colder ngk's came gapped at like .28 I re-gapped them to .33 car runs straight...
I used NGK Iridium 1 step colder plugs.. Can't remember the part number....
10-08-2011, 05:11 AM
Registered User
Join Date: May 2006
Location: Ottawa
Posts: 1,732
Likes: 0
I don't even gap them, never had an issue with blow out, I run 9lbs though.
High boost will require small gap.
10-08-2011, 08:11 AM
New Member
Join Date: Oct 2007
Location: raleigh-wood NC
Posts: 8,807
Likes: 0
you want the absolute biggest gap without misfire or spark blowout
10-08-2011, 08:50 AM
Registered User
Join Date: Feb 2005
Location: Indianapolis
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
I never gapped mine and I'd hit 28 psi with no blowout
10-08-2011, 06:35 PM
New Member
Thread Starter
Join Date: Apr 2009
Location: SoCal
Posts: 275
Just finished installing them and they work great. Thanks for all the feedback!
01-18-2012, 12:08 PM
New Member
Join Date: Aug 2007
Location: Ancaster, ontario
Posts: 199
Likes: 0
01-18-2012, 03:42 PM
New Member
Join Date: Mar 2005
Location: Houston
Posts: 1,627
Likes: 0
How much boost? What are you dwell times set too?
01-18-2012, 04:14 PM
New Member
Join Date: Oct 2007
Location: raleigh-wood NC
Posts: 8,807
Likes: 0
^how much dwell will you run? I know the haltechs are set at 4.5. You ever run more than that at high rpms?
01-18-2012, 05:32 PM
New Member
Join Date: Mar 2005
Location: Houston
Posts: 1,627
Likes: 0
I have mine set to 4.4ms at higher RPM's. Never had to run more than that yet.
01-19-2012, 08:10 AM
New Member
Join Date: Mar 2006
Location: Lafayette, La
Posts: 775
What plugs are you guys using? Part number if possible thanks.
Jeremiah
01-19-2012, 09:53 AM
Registered User
Join Date: May 2006
Location: Chatsworth
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
Total D
What plugs are you guys using? Part number if possible thanks.
Jeremiah
LFR6AIX-11
or
LFR7AIX
01-19-2012, 10:30 AM
New Member
Join Date: Mar 2006
Location: Lafayette, La
Posts: 775
Quote:
Originally Posted by
Seb-Specialty-Z
LFR6AIX-11
or
LFR7AIX
Thanks man
01-19-2012, 01:33 PM
New Member
Join Date: Mar 2005
Location: Houston
Posts: 1,627
Likes: 0
Just be extra careful gapping iridium plugs.
01-19-2012, 07:19 PM
Registered User
Join Date: May 2006
Location: Chatsworth
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
Total D
Thanks man
No problem. You won't need to gap them if anything just check to make sure the gap didn't change due to shipping and handling.
03-08-2012, 04:19 PM
Registered User
Join Date: Apr 2006
Location: Piscataway, NJ
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
Seb-Specialty-Z
LFR6AIX-11
or
LFR7AIX
are these the ones you use on any turbo kit? I'm doing mine tomorrow, need to get the plugs still. I run the PL GT35R
03-08-2012, 05:11 PM
New Member
Join Date: Oct 2007
Location: raleigh-wood NC
Posts: 8,807
Likes: 0
the lfr6a (ngk 6668) is a better choice as they are already gapped at a turbo appropriate 0.035"