FS: Vortech V-2 2005 350z - 3500 - Seattle
Forced to sell due to medical bills.
This Vortech SC kit has been on the Z for a year now. It sat parked in the garage from April to July as I was not allowed to drive.
It has roughly 7000 miles on it at this point.
I have had zero issues with this kit. Last issues (I thought was a issue) turned out to be lost traction at 60 (4th gear pull).
What you get -
Vortech Kit for a 2005 NON-Revup Z (V-2 SCi-Trim, Satin)
pn -4NZ218-050SQ
Deatschwerks Injectors 600cc injectors
3.12 Pulley
HPX PMAS MAF Sensor (Nissan) (HPX PMAS)
Vortech intercooler and tubing, brackets etc.
Oil lines, and hardware ( you will need the tool to drill the hole in the oil pan)
Original Vortech fuel pump and S/S box
Extra cog belt, new air filter
I have AEM Boost, F/A Ratio and Water/oil temp guages with a nice gauge pod. I will include them for 200 if bought by the same person as the SC kit.
I had this kit tuned by Intec Racing to 430HP at the wheels. with test pipes, exhaust and a TB spacer, light flywheel (all three NOT included). A absolute blast to drive.
I'm running a walbro 255, but it is not included, although, if local, i'll swap with you.
3500, plus the cost of shipping.
I'd guess it weighs 80 lbs, coming from 98092 (Auburn, WA)
Also have JWT flywheel, new in the box. I'll add it in for 100 bucks, if bought with the SC kit.
IT IS STILL ON THE CAR, and will not be taken off untill it is bought and a down payment is made.
Not parting the system at this time.
Original pulley is included.
http://youtu.be/afAoK8eqNFI
This Vortech SC kit has been on the Z for a year now. It sat parked in the garage from April to July as I was not allowed to drive.
It has roughly 7000 miles on it at this point.
I have had zero issues with this kit. Last issues (I thought was a issue) turned out to be lost traction at 60 (4th gear pull).
What you get -
Vortech Kit for a 2005 NON-Revup Z (V-2 SCi-Trim, Satin)
pn -4NZ218-050SQ
Deatschwerks Injectors 600cc injectors
3.12 Pulley
HPX PMAS MAF Sensor (Nissan) (HPX PMAS)
Vortech intercooler and tubing, brackets etc.
Oil lines, and hardware ( you will need the tool to drill the hole in the oil pan)
Original Vortech fuel pump and S/S box
Extra cog belt, new air filter
I have AEM Boost, F/A Ratio and Water/oil temp guages with a nice gauge pod. I will include them for 200 if bought by the same person as the SC kit.
I had this kit tuned by Intec Racing to 430HP at the wheels. with test pipes, exhaust and a TB spacer, light flywheel (all three NOT included). A absolute blast to drive.
I'm running a walbro 255, but it is not included, although, if local, i'll swap with you.
3500, plus the cost of shipping.
I'd guess it weighs 80 lbs, coming from 98092 (Auburn, WA)
Also have JWT flywheel, new in the box. I'll add it in for 100 bucks, if bought with the SC kit.
IT IS STILL ON THE CAR, and will not be taken off untill it is bought and a down payment is made.
Not parting the system at this time.
Original pulley is included.
http://youtu.be/afAoK8eqNFI
Last edited by RetchedOne; Jan 27, 2012 at 10:09 AM.
Also have a JWT flywheel (New in the box) that can go with the SC if the full price is met. I was going to replace my JWT (has a chipped tooth) but never did it.
I'll post a pic later.
I'll post a pic later.
Every push of the pedal, you get a chub and a smile...
A ring can give a chub too... but then it costs you for 18 years.
But i'd still do the ring
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM
bcoffee20
Zs & Gs For Sale
5
Nov 19, 2015 06:39 PM
seagrasser
Zs & Gs For Sale
6
Oct 11, 2015 03:27 PM










