FS: Jenvey Individual Throttle Bodies (ITB) w/ FI Plenums and NA Horns
#1
Sponsor
Injected Performance
Injected Performance
Thread Starter
iTrader: (15)
Join Date: Jun 2004
Location: Houston
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Jenvey Individual Throttle Bodies (ITB) w/ FI Plenums and NA Horns
I built these for my road race car but ended up selling it before I did anything with it. This is the Jenvey ITB Kit with custom forced induction plenums and I'll also include the Jenvey NA horns depending on if you are in between builds. Also included is a stock accelerator pedal, throttle cable wire, etc.
Included:
(6) Jenvey ITB Throttle Bodies
(2) Custom FI Plenums
(2) Jenvey Fuel Rails
(1) Nissan Accelerator Pedal modified for throttle cable
(1) Jenvey TPS
(1) Air Meter
(1) Crossover Tube with Wiggins Clamps
I also have a set of Siemens 2200cc Injectors with only a few hours on them that I will sell for an additional cost. If you are going to run the forced induction plenums you will need to make piping to an intercooler. Any questions please ask.
Priced at $2,995 (Jenvey kit alone is over $2,000)
Included:
(6) Jenvey ITB Throttle Bodies
(2) Custom FI Plenums
(2) Jenvey Fuel Rails
(1) Nissan Accelerator Pedal modified for throttle cable
(1) Jenvey TPS
(1) Air Meter
(1) Crossover Tube with Wiggins Clamps
I also have a set of Siemens 2200cc Injectors with only a few hours on them that I will sell for an additional cost. If you are going to run the forced induction plenums you will need to make piping to an intercooler. Any questions please ask.
Priced at $2,995 (Jenvey kit alone is over $2,000)
Last edited by InjectedPerf; 06-11-2012 at 07:25 PM.
Trending Topics
#8
Sponsor
Injected Performance
Injected Performance
Thread Starter
iTrader: (15)
Join Date: Jun 2004
Location: Houston
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
These are for the DE. I just designed it for a twin plenum, dual inlet intercooler setup.
Before the BOV's were relocated due to firewall clearance issue.
Before the BOV's were relocated due to firewall clearance issue.
Last edited by InjectedPerf; 06-11-2012 at 07:26 PM.