I bought a used greddy twin turbo kit and I'm missing a few metal fittings, power steering cooler, air filters, and windshield washer relocation tank. Please help me to find the correct sizes of these items.

Here are websites with exact parts from the turbo kit:
http://www.greddy.com/upload/file/03-350Z_18G.pdf
MISSING PART NUMBERS: -19,21-26,30-33,46-52,55(2),56(2),57(2),58,59

INTERCOOLER KIT:
http://www.greddy.com/upload/file/12020203_i.pdf
MISSING PARTS: 8,17-26

 

Your best bet is going to be to call Greddy's California office and have them source them for you. I've ordered direct from them before but have also had to buy from a third party.

If they can't help, might have to find another used kit that is complete and use it for parts, or make do with custom / alternate pieces.

 

Greddy told me that I had to go through an authorized dealer and when I did thu said they wouldn't sell individual parts? I'm trying to source them myself but the metal fittings on the PDF file don't have the sizes listed.

 

I went thru some of this when i had a leaking oil line.They used some of the wall british fitings on there oil lines which were a ***** to find on short notice.Luckily i had someone fab up some new lines which have held for 3+ years.Good luck with them.

 

19: hose- auto parts store
21-26: brass normal pipe fittings = ace hardware, mcmaster.com
30-33: hose- auto parts store
46: check valve, mcmaster.com, or nissan as listed

you can get any radiator overflow off ebay. there is nothing special about the greddy one

55:td05 3 bolt gasket: ebay
56: from nissan as listed
57: return drain gasket, ebay
58:thermo cloth: heat wrap from ebay
59: 3 way barb: ebay maybe?

intercooler
8: hose- auto parts store
17-18: reuse your stock power steering cooler. just mount it in a different spot by using more hose from the auto parts store
19-23: washer tank: good luck. greddy will charge a fortune. rainX is cheap havent had a washer tank in my car for 3 years

24-26: bolts: mcmaster.com

 

^^^thank you! For such simple parts it's been stressing me out!

 

Also does anyone know what size airinx greddy filters I need? I know theyre the ay-sb

 

don't bother with the airinx filters...total garbage. search for K&N filters for greddy here. There is a full thread that covers that. there are some different models we have used.

 

Search turbonetics kit install instructions. They tell you how to mount the cooler to the right side wheel well without any additional parts.

 

Here is a thread for the filter info.

https://my350z.com/forum/forced-indu...m-filters.html

 

forged performance sourced me individual parts

 

Anybody think the k&n Rc-9350 will fit right on?

 

Think the rx-4960 will work?

 

buy two of these from summit

 

Lol which ones?

 

Knn-ru-5111

they fit on the stock pipes but you have to push the filter down on them. I cut my pipes to fit.