Dyno results after finally getting the car properly tuned.

Build:
* Vortech Kit upgraded w/ 3.12" Pulley
* Intake Plenum Spacer
* Nismo Exhaust
* Quaife LSD
* In-Tank Walbro 255
* Tuned w/ UpRev
* Everything else is stock

Results: 406WHP @ 6700RPM:


Took it lapping the other day, feels amazing! Just need to buy new brakes now... that session didn't last too long

 

damb man nice numbers!!!how was the weather?? I still think my tuner sucks!! it was his first time doing a Z he works specially on evos but I ha heard good stuff about him that why I took it there.. I have same mods as you do and I got 350whp but again the weather on my tune was horrible. about 110* and 70% humidity. I've been trying to contact church automotive but I think I'm just gonna wait until I build the engine. enjoy it!!

 

Nice Man!!!!

 

Congrats! Where are the vids?

 

+1 for "lapping" vids

 

Nice numbers!... DE or HR? Stock internals?

 

Lapping videos will have to wait until my Akebono's come in the mail. I boiled my brake fluid in < 45minutes...

Here's a video of one of the pulls though, sorry I ended it a little early.
http://www.youtube.com/watch?v=qWzC7...ature=youtu.be

@Calinismo350z - The day was pretty cool dry summer's day, maybe about 22degrees C, it's never very humid out here in the prairies.

@Triji - It's a 2003 base model, and all internals are stock. I replaced the old beatup 6spd tranny, and upgraded to a LSD.

 

Great numbers

 

ooh then that's why explains more whp besides the dyno they used should be reading higher, mine was on a dyno jet=lower numbers.
heres my video
https://www.youtube.com/watch?v=onzZ...ature=youtu.be

 

Thanks a bunch for the advice throughout the build!

 

^^ The OldMan is an encyclopedia of info on the Vortech

 

What size injectors??

 

Stock, I bought some 400's but never got around to putting them in. It ran pretty rich the whole way through the powerband, but we had to keep the inline fuel pump from Vortech connected, ditched the SS Box and went with UpRev.