When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I purchased the premium 60k+ bearings from 928motorsport, but before I had them installed, i overspun my current v3 while on the dyno. It is now being sent to 928 to install the new bearings, but i have since purchased a YSi for bigger goals.
It had an aftermarket volute and impeller on when the bearings went, so the SCi/Si volute and impeller did not get any damage and is being sent to 928 for the rebuild.
Blower will be in no question 100% working order leaving 928. No questionable or damaged parts will be used. It will meet 928's standards.
Blower should support well over 500whp reliably.
Buyer will have the option to upgrade to the 928 impeller, thus making it their advertised "super vortech"
Pricing:
Vortech V3 SCi, rebuilt by 928 using their premium bearings with carbonate coating.
or
"Super Vortech", rebuilt by 928 using brand new 928 upgraded billet impeller, premium bearings with carbonate coating .
*This is for fully assembled head unit only. Will also include 2 new vortech oils.*
Mods. Updated timestamp picture is posted, but isnt as obvious as the paper in the other pics. If you need pictures of the headunit, they can be provided.
Last edited by Guilty1s; 07-30-2018 at 04:45 PM.
Reason: Sold
06-25-2018, 04:49 PM
Vortech V3 headunit only from 928motorsports
. sure I understand you, if you change your mind, let me know. Of course I would cover the post and all expenses...
