350z cams for turbo
#1
New Member
Thread Starter
Join Date: Jul 2012
Location: orlando
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
350z cams for turbo
Hey so I just got another 350z and a Greddy twin turbo kit that I have yet to install. I wanted to do some cams when I did all the mods to stock engine. I’ve been looking at Tomei 272 cams 10.50mm with valve springs... would these work well with my twin turbo kit?
#2
350Z-holic
iTrader: (13)
a few questions:
are you building the block while it's out of the car?
what are you tuning with?
what are your power goals and/or what boost levels do you want to run?
are you building the block while it's out of the car?
what are you tuning with?
what are your power goals and/or what boost levels do you want to run?
Last edited by bealljk; 10-10-2018 at 05:19 PM.
The following 2 users liked this post by bealljk:
BluestreamDE (10-10-2018),
MicVelo (10-10-2018)
#3
New Member
Thread Starter
Join Date: Jul 2012
Location: orlando
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
stock block
reflash ecu
9 psi is what my tuner said Is the safe spot
I just want more power for that 9 psi
#4
350Z-holic
iTrader: (13)
9psi is going to put you at 400-425hp which is the limits of the stock block regardless of the cams. If you want more power you gotta build the block.
#6
350Z-holic
iTrader: (13)
Correct ...
Thread
Thread Starter
Forum
Replies
Last Post
chichi506
Engine & Drivetrain
36
02-05-2006 03:36 AM