My Arias Forged Pistons: Show and Tell
#41
Registered User
iTrader: (2)
Join Date: Jun 2003
Location: Carrollton TX
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
OK, question for anyone. What is with the cutout (shave) on the back side of my piston? Do they all have them or just the shelf ones? Here is a pic of what I am talking about.
#44
Registered User
iTrader: (12)
Join Date: Jun 2003
Location: Man in the Sun
Posts: 2,222
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by spazpilot
OK, question for anyone. What is with the cutout (shave) on the back side of my piston? Do they all have them or just the shelf ones? Here is a pic of what I am talking about.
OK, question for anyone. What is with the cutout (shave) on the back side of my piston? Do they all have them or just the shelf ones? Here is a pic of what I am talking about.
#45
Registered User
iTrader: (8)
Join Date: Jun 2003
Location: Nor Cal.
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
Arias
Originally posted by spazpilot
OK, question for anyone. What is with the cutout (shave) on the back side of my piston? Do they all have them or just the shelf ones? Here is a pic of what I am talking about.
OK, question for anyone. What is with the cutout (shave) on the back side of my piston? Do they all have them or just the shelf ones? Here is a pic of what I am talking about.
#46
Spaz...mine have the same cutout on the underside of my piston, and mine are 9.0:1. I spoke to Arias, and they said that is the spot where the machine holds the piston during the CNC machining process. It's doesnt effect anytything on the piston..and is normal.
I bet becuase the 9.0:1 have slightly higher tops, they put those valve cutouts there for safety....at least that is my guess.
I bet becuase the 9.0:1 have slightly higher tops, they put those valve cutouts there for safety....at least that is my guess.
#47
Registered User
iTrader: (8)
Join Date: Jun 2003
Location: Nor Cal.
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
valve cutouts
Originally posted by gq_626
Spaz...mine have the same cutout on the underside of my piston, and mine are 9.0:1. I spoke to Arias, and they said that is the spot where the machine holds the piston during the CNC machining process. It's doesnt effect anytything on the piston..and is normal.
I bet becuase the 9.0:1 have slightly higher tops, they put those valve cutouts there for safety....at least that is my guess.
Spaz...mine have the same cutout on the underside of my piston, and mine are 9.0:1. I spoke to Arias, and they said that is the spot where the machine holds the piston during the CNC machining process. It's doesnt effect anytything on the piston..and is normal.
I bet becuase the 9.0:1 have slightly higher tops, they put those valve cutouts there for safety....at least that is my guess.
FYI , I noted that the 8.5s (CPs) offered by SGP have cutouts and the ARIAS 8.5/8.6 does not. My assumption is that CP added extra clearance for very aggressive cam lift profiles. I'm not so concerned ,since I only plan on OEM or mild street grind and any good builder will "clay" the crowns and check for clearance.
I'd be curious to know the weight specs between the ARIAS and CPs though?
#48
This may sound dumb...with with the performance cams, I though they just increase the duration that the valve is open, and not the actual distance that the valve opens.
Either way, you are correct...any engine builder will check check valve clearances, and will make adjustments as necessary. They also leave extra clearance for rod stretch.
Either way, you are correct...any engine builder will check check valve clearances, and will make adjustments as necessary. They also leave extra clearance for rod stretch.
#49
Registered User
iTrader: (2)
Join Date: Jun 2003
Location: Carrollton TX
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
cams are duration and lift, but you don't want a raddical lift on a FI car you could end up floating the valves. I would venture on the JWT or nismo cams for a good daily driven FI car. thanks for the reply on the cutout. Thought it would be something like that.
Spaz
Spaz
#51
Registered User
Join Date: Aug 2002
Location: austin
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by gq_626
This may sound dumb...with with the performance cams, I though they just increase the duration that the valve is open, and not the actual distance that the valve opens.
Either way, you are correct...any engine builder will check check valve clearances, and will make adjustments as necessary. They also leave extra clearance for rod stretch.
This may sound dumb...with with the performance cams, I though they just increase the duration that the valve is open, and not the actual distance that the valve opens.
Either way, you are correct...any engine builder will check check valve clearances, and will make adjustments as necessary. They also leave extra clearance for rod stretch.
#52
Registered User
iTrader: (12)
Join Date: Jun 2003
Location: Man in the Sun
Posts: 2,222
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by azrael
the most agressive cams lengthen duration and increase lift as well. For instance, the stock lift on a 350Z cam is 9.9 mm (at least from what I have been able to find. This could be a bit off.). The Tomei 268 cam increases the maximum lift to 10.5mm. The JWT cam has a maximum lift of 10.9 mm.
the most agressive cams lengthen duration and increase lift as well. For instance, the stock lift on a 350Z cam is 9.9 mm (at least from what I have been able to find. This could be a bit off.). The Tomei 268 cam increases the maximum lift to 10.5mm. The JWT cam has a maximum lift of 10.9 mm.
#53
Registered User
iTrader: (8)
Join Date: Jun 2003
Location: Nor Cal.
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
CAMs
Originally posted by g356gear
Agreed.....the Tomei 264's are only 10.2 mm and like you said the 268's jump to 10.5mm
Agreed.....the Tomei 264's are only 10.2 mm and like you said the 268's jump to 10.5mm
#57
Registered User
iTrader: (2)
Join Date: Sep 2004
Location: Columbus, Ohio
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by spazpilot
cams are duration and lift, but you don't want a raddical lift on a FI car you could end up floating the valves.
Spaz
cams are duration and lift, but you don't want a raddical lift on a FI car you could end up floating the valves.
Spaz
Usually going with more lift and a bit more duration is the best way to go on a forced induction car. The lift gets you the power without sacrificing low end torque like duration will.
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM