JIC FLT-A2 or Flex+EDFC?
#21
New Member
iTrader: (10)
Originally Posted by G35cTT
here's a picture of them installed. I don't really dig the color of them but they work really good. Does anyone else have these??? Just wondering
http://www.koni-na.com/pdfcatalogs/K...ortCatalog.pdf
Here are your specs in case you wanted to know your spring rates.
KW coilovers Variant's 1,2&3
Monotube construction,
V1=non adjustable dampning,
V2=adjustable damping,
V3=separate adjustability for compression damping AND rebound damping and is the only product of it’s kind at this time.
Spring rates Front 485lbs to 525Lbs Rear: 240Lbs to 548Lbs (progressive springs)
#22
Registered User
iTrader: (2)
Right I probably am one of the few that do have them, they work really good if anyone has tried them. My car is missing an engine so when I gtet it all up n running I will try this out. Thanks, their site didn't have very good instructions this is much better is this for KW or koni though?
Originally Posted by Gsedan35
You have the only known G35 running KW coilovers. You may or may not gain from attempting to set the compression and rebound damping. If you wanted to try go here find out how to do it right and skip to page 13
http://www.koni-na.com/pdfcatalogs/K...ortCatalog.pdf
Here are your specs in case you wanted to know your spring rates.
KW coilovers Variant's 1,2&3
Monotube construction,
V1=non adjustable dampning,
V2=adjustable damping,
V3=separate adjustability for compression damping AND rebound damping and is the only product of it’s kind at this time.
Spring rates Front 485lbs to 525Lbs Rear: 240Lbs to 548Lbs (progressive springs)
http://www.koni-na.com/pdfcatalogs/K...ortCatalog.pdf
Here are your specs in case you wanted to know your spring rates.
KW coilovers Variant's 1,2&3
Monotube construction,
V1=non adjustable dampning,
V2=adjustable damping,
V3=separate adjustability for compression damping AND rebound damping and is the only product of it’s kind at this time.
Spring rates Front 485lbs to 525Lbs Rear: 240Lbs to 548Lbs (progressive springs)
Thread
Thread Starter
Forum
Replies
Last Post