Hi all,

I am floating the idea of moving on to other classes, so I have my Zed up for sale. Here are the details:

Never wrecked, it is currently setup for NASA ST3. Original owner since taking delivery in July 2005. Maintained and built by Japtrix/Pros Tuning in West Palm Beach, FL. Additional photos or info available by calling 954-732-6426 or emailing me at obzezzed350@gmail.com. Price is 35k.

Overview:
- 5 Hours on built engine, 314whp, 284tq on E85
- 5 Hours on new OEM 6 speed transmission
- 3218 lbs with 190lb driver, and 3/4 tank of fuel
- Turn key w/ Traqmate, Cool Shirt included.
- 2 sets of Enkei RPF1s (18x9.5)
- NASA/SCCA Logbooks

Engine:
- 13:1 Compression w/ CP Pistons, Carillo Rods
- JWT S7 Cams, Ferrera Valves
- 3 angle valve job
- 7500RPM redline
- Haltech ECU paired with Uprev Flash
- Motodyne Plenum Spacer
- NWP 75mm throttle body
- Custom intake/exhaust
- Crawford Headers
- Spare block and 6 speed included
- Oil cooler
- Koyo Radiator
- Fuel transfer pump in tank to allow car to run under 1 gallon.

Drivetrain:
- OS Giken single disk clutch
- OS Giken LSD
- SPL differential bushings
- Differential cooler

Suspension/Brakes:
- Custom valved JIC FLT Dampers
- 20kg F/ 12kg R spring rates
- Stoptech ST40 Front BBK
- OEM Brembo Rear Brakes
- SPL upper a-arms
- SPL compression bushings
- SPL rear camber links
- SPL rear midlinks
- SPL lockout kit
- SPL bumpsteer kit

Chassis/Body
- Fulcrum Aeroworks front splitter w/ belly tray
- Fulcrum Aeroworks 71" rear wing, 14" chord
- Seibon Carbon rear hatch
- Racing Shields rear lexan window

Safety
- Mesh window net
- Schroth belts through 2020
- Sparco Pro-ADV seat
- Cage w/ NASCAR bars driver side
- Fire system w/ 3 nozzles

 

This car is very well prepared and is a performer, very fast. Sad to see it for sale, but good luck J.

 

What class would this Z race in SCCA?

 

As it sits, likely T1 but it wouldn't be optimal (overweight by 400lbs ). It may do ok at the regional level in that class depending on the compeition. My SCCA region had a catch all class that I ran it in for testing/practice.