Power from Kanji exhaust and Uprev
#1
Vendor - Former Vendor
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Location: Dirty South
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Power from Kanji exhaust and Uprev
So.............we put one of our test mules back on the dyno yesterday, a 2004 G35.
We first dyno'd it with everything stock. It made 214HP and 219tq in 4th gear going from 1700rpm's to 6400rpm's.......peak power was at about 6200rpms for HP. Oddly our G35 made over 200ft/lb of torque from 2000rpm's and on......
Changed exhaust our with the Kanji true dual catback from us. HP went up 9HP to 223HP. We lost about 2 to 3 foot pounds of torque until about 4300rpms and then gained about 4 to 5 foot pounds until redline, but peak torque topped out at 216, so officially a loss of 3, but the usable power range of the torque was increased, so in reality an increase
not bad for $399
Then, we turned the Map on for the Uprev program that we built for the car.
HP went up another 8 to 231HP and torque went to 222, from 216, so up 6.
not bad for $295.
Here is the graph for the exhaust vs Uprev. We were using the OBDII port so that's why the lines......but look at the filter value, just a 7! not bad
We first dyno'd it with everything stock. It made 214HP and 219tq in 4th gear going from 1700rpm's to 6400rpm's.......peak power was at about 6200rpms for HP. Oddly our G35 made over 200ft/lb of torque from 2000rpm's and on......
Changed exhaust our with the Kanji true dual catback from us. HP went up 9HP to 223HP. We lost about 2 to 3 foot pounds of torque until about 4300rpms and then gained about 4 to 5 foot pounds until redline, but peak torque topped out at 216, so officially a loss of 3, but the usable power range of the torque was increased, so in reality an increase
not bad for $399
Then, we turned the Map on for the Uprev program that we built for the car.
HP went up another 8 to 231HP and torque went to 222, from 216, so up 6.
not bad for $295.
Here is the graph for the exhaust vs Uprev. We were using the OBDII port so that's why the lines......but look at the filter value, just a 7! not bad
Last edited by JGYMotorsports; 06-26-2013 at 08:07 AM.
#5
Vendor - Former Vendor
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Location: Dirty South
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Kanji 350z and G35 polished exhaust with 60mm piping and 120mm tips. Uses an H pipe and also has resonators: $469 delivered (forum pricing)
Last edited by JGYMotorsports; 06-25-2013 at 02:15 PM. Reason: lowering price
Trending Topics
#9
Registered User
iTrader: (1)
Join Date: Sep 2011
Location: Atkins, VA
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
I found this video in your Youtube account. It's like the Army paid you to build them a 240sx. Clean engine bay, sick
but...........Post the video of the exhaust!!!!
Post the video of the exhaust!!!!
Last edited by jasonG35; 06-26-2013 at 08:16 AM.
#12
Registered User
iTrader: (1)
Join Date: Sep 2011
Location: Atkins, VA
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
260HP and 240TQ? dyno chart?
what kind of camera do you use? Polariod where the print comes out the front? no wonder the dyno tuning prices are so cheap, you save all that digital media money
just playin
what kind of camera do you use? Polariod where the print comes out the front? no wonder the dyno tuning prices are so cheap, you save all that digital media money
just playin
Thread
Thread Starter
Forum
Replies
Last Post