what is the average time in the 1/4 for you guys
Best: 14.105 @ 100.02mph. My 60 foot were mostly in the 2.1-2.2 range.
G35 Coupe, Z-Tube and K&N drop-in, that's it!
Temps were in the 75-80 degrees range and humidity was pretty high. Track elevation is probably a few hundred feet.
G35 Coupe, Z-Tube and K&N drop-in, that's it!
Temps were in the 75-80 degrees range and humidity was pretty high. Track elevation is probably a few hundred feet.
15.1 @94 MPH, 2.1 60', 85F, 70% humidity, near sea-level (Island Dragway, NJ). Best of 5 runs, brake-torqued to 2100RPM stall with VDC off, let 5AT shift automatically. Totally stock with 2000 miles on the odometer. 
Going to try again now that it is broken-in with 4.5k miles.

Going to try again now that it is broken-in with 4.5k miles.
yeah, I've learned that the 5AT's are pretty slow unless you get into modding them pretty heavily... over the course of my mods, I've basically dropped about 0.4-0.5 sec from my stock 1/4 mi runs...
Trending Topics
Originally posted by lacartus
15.1 @94 MPH, 2.1 60', 85F, 70% humidity, near sea-level (Island Dragway, NJ). Best of 5 runs, brake-torqued to 2100RPM stall with VDC off, let 5AT shift automatically. Totally stock with 2000 miles on the odometer.
Going to try again now that it is broken-in with 4.5k miles.
15.1 @94 MPH, 2.1 60', 85F, 70% humidity, near sea-level (Island Dragway, NJ). Best of 5 runs, brake-torqued to 2100RPM stall with VDC off, let 5AT shift automatically. Totally stock with 2000 miles on the odometer.

Going to try again now that it is broken-in with 4.5k miles.
14.033 @ 99.74mph 2.12 60'
350'msl - low humidity - 72 degrees
03 G35C/6MT/DG/G/PREM Stillen Exhaust, Injen CAI (black), Crawford V5 Plenum (black), Eibach Pro Kit, 19" BBS RG-R Wheels, Stark 30 Huper Optik, Crawford High Flow Cats, Mobile One Synthetic, Impul Rear Spoiler, rebadged in Black Chrome.
350'msl - low humidity - 72 degrees
03 G35C/6MT/DG/G/PREM Stillen Exhaust, Injen CAI (black), Crawford V5 Plenum (black), Eibach Pro Kit, 19" BBS RG-R Wheels, Stark 30 Huper Optik, Crawford High Flow Cats, Mobile One Synthetic, Impul Rear Spoiler, rebadged in Black Chrome.
time listed in sig. this was done in 40 degree weather with an unprepped track. Tires were spinning well through first and second. I'd imagine in better conditions i can be well into the 13's.
One thing I noticed about the G35c's is that its tougher to launch than a 350z for whatever reason. I'd imagine its due to the heavier rear end than the Z. I pulled a best 60ft of 1.94 on the Z in street tires... yet its tough to get a clean launch on the G.
One thing I noticed about the G35c's is that its tougher to launch than a 350z for whatever reason. I'd imagine its due to the heavier rear end than the Z. I pulled a best 60ft of 1.94 on the Z in street tires... yet its tough to get a clean launch on the G.
Nobody asked for my 2 cents but I'm gonna throw them in...
My 2003 Maxima SE w/ 4 speed auto ran a 14.4 @94.6 MPH. This was at Infineon Raceway in Sonoma, California. This was my final run of the night and it was 58 degrees outside with low humidity.
My 2003 Maxima SE w/ 4 speed auto ran a 14.4 @94.6 MPH. This was at Infineon Raceway in Sonoma, California. This was my final run of the night and it was 58 degrees outside with low humidity.
Nobody asked for my 2 cents but I'm gonna throw them in...
My 2003 Maxima SE w/ 4 speed auto ran a 14.4 @94.6 MPH. This was at Infineon Raceway in Sonoma, California. This was my final run of the night and it was 58 degrees outside with low humidity.
My 2003 Maxima SE w/ 4 speed auto ran a 14.4 @94.6 MPH. This was at Infineon Raceway in Sonoma, California. This was my final run of the night and it was 58 degrees outside with low humidity.
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
Jan 2, 2022 12:58 PM



see sig.

