I tried the HELP method, didn't work. But it only cost 8 bucks and 10 minutes, TRY IT
whatcha got to lose?

 

3000 miles and still no light using the anti-foulers

 

anyone know the o2 sensor wire colour

 

This has been my experience...

I tried first with sensors we had for a 1996 Z-28 Camaro OBDII my brother had:

 

After those did not worked at all, I tried these:

 

THEY DIDN'T WORKED EITHER... I'm pissed as hell...

and YES, that is an Official NISSAN Tech...

PS:

We hooked the Consult II and the simulator was working fine, the F--- ECU, still threw an SES light…
mine is a 2004.5 BTW

 

YEs.....it didnt work....
try method II - connect it to the ECU ..
website.
http://home.comcast.net/~turbo350z/o2/o2.html
connect the 2 white signal wires to the 55 and 74
connect the red wire to the 119
ground to the 116..

i hope it didnt work becuase i connect the wrong wire on the o2 sensors..ill try connect to the ECU directly,hope it will works..

 

2000 miles and counting; so far so good!

Had it at the drags and over multiple passes it never went on.

Came on one time on a freeway run at wot up to about 140mph