I just installed an Injen SES exhaust and the two mufflers dont seem to align the same. One side is protruding out more. I tried loosening all the bolts and repositioning them but that doesn't seem to be doing the trick. I was wondering if any of you had similar problems? Any suggestions would be appreciated.

 

I have thesame prob my driver side tip is sticking out about an inch more than the passenger side.

 

Yea, thats the side thats sticking out more for me also. A friend of mine also has the same problem. I am getting frustrated..

 

Did you ever find a solution to your problem?

 

I took it to one of those muffler shops and had them cut a portion off the midpipe and weld it back. Took maybe 10 minutes and cost me $25. I dont know if thats the best way to go about it but the exhaust tips are aligned pretty evenly now. All in all I am happy with the results.

 

You just have to keep aligning it. I had the same problem, I spent a good hour lining it up perfectly, as my driver's side was protruding too. The key is the bracket that says "SES" on it

 

Yeah I spent some time and used a jack to hold up both sides and got it perfect. I never would have let a muffler shop touch it.

 

I had the same problem with my driverside tip sticking out 1/4 of an inch, and took it to Group 5 Motorsport in San Diego. They looked at it and where unable to fix it. I ended up having to take it to a muffler shop and having it cut.