Notices
Intake Exhaust Moving all that air in and out efficiently

Another MREV PLUS dyno ~22HP and 26 TQ

Old Mar 4, 2006 | 06:14 PM
  #41  
thawk408's Avatar
thawk408
Registered User
iTrader: (16)
 
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Default

Originally Posted by kittah
will the mrev or mrev plus work on the 300 hp AT engines?
If it is the 300hp engine, then it will work.
Reply
Old Mar 4, 2006 | 06:15 PM
  #42  
kittah's Avatar
kittah
Registered User
 
Joined: Feb 2006
Posts: 35
Likes: 0
From: Pasadena,Ca
Default

Originally Posted by thawk408
If it is the 300hp engine, then it will work.
awsome thanks
Reply
Old Mar 4, 2006 | 06:23 PM
  #43  
rolling's Avatar
rolling
Registered User
iTrader: (2)
 
Joined: Aug 2004
Posts: 1,207
Likes: 0
From: Portland OR
Default

AT's dont have the 300 hp. they Still use the 287 even the 06 as they have more Tq.
Reply
Old Mar 5, 2006 | 09:33 AM
  #44  
SOLO-350Z's Avatar
SOLO-350Z
'12 TL SH-AWD
Premier Member
iTrader: (26)
 
Joined: Feb 2004
Posts: 6,348
Likes: 1
From: Alamo
Default

Here is two videos. Watch the 2nd one since its the better one anyways. 1-4th gear full throttle pull with MREV and Stillen CAI on a 6mt 05 Sedan G35, with a full tank of gas and heavy 19" wheels.

http://www.sah2o.com/russ/videos/

With this setup I have pulled several 350z and modded g35s. Even STIs that are slightly modded as well.
Reply
Old Mar 5, 2006 | 10:27 AM
  #45  
absolutg's Avatar
absolutg
Registered User
 
Joined: Dec 2005
Posts: 519
Likes: 0
From: Bay Area, CA
Default

thawk: what boltons do you have to push to 280-290 to the wheels??
Reply
Old Mar 6, 2006 | 04:44 PM
  #46  
Mazinger Z's Avatar
Mazinger Z
New Member
iTrader: (49)
 
Joined: Dec 2005
Posts: 6,712
Likes: 1
From: Los Angeles
Default

Originally Posted by kittah
will the mrev or mrev plus work on the 300 hp AT engines?
ATs dont have the rev up engine.
Reply
Old Mar 6, 2006 | 08:25 PM
  #47  
thawk408's Avatar
thawk408
Registered User
iTrader: (16)
 
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Default

Originally Posted by absolutg
thawk: what boltons do you have to push to 280-290 to the wheels??
I have crawford plenum, crawford headers, testpipes, JWT popcharger, and borla dual exhaust. With 93 octane I put down 282rwhp SAE corrected on a dynojet. This was with an 05 track, which has the 300hp motor.

Last edited by thawk408; Mar 6, 2006 at 08:30 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NissanZcrazy
Forced Induction
4
Sep 23, 2015 07:59 AM
_koubie_
Engine & Drivetrain
5
Sep 20, 2015 06:34 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 12:43 PM.