Power problems have risen for this 06'
#21
Registered User
Join Date: Sep 2004
Location: College Station
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Don't clean a MAF with break cleaner, used denatured alcohol, rubbing alcohol or special electonic parts cleaners (go to radio shack). Last issue of Grass Roots Motorsports had some new product specifically designed to clean a MAF as well.
#22
Registered User
iTrader: (33)
Join Date: Jan 2003
Location: North Carolina
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97supratt
Actually they say if you go colder you'll have a stronger spark.
The only difference is that the colder plug is capable of removing more heat from the chamber.
In a NA setup, you'd be better off with stock heat range as the colder plug will remove more heat than is desired. This will result in the fuel not being completely burned off and build up of carbon.
There is nothing wrong with running one step colder plugs in an NA setup, but you will not gain spark and you will increase carbonization. It is a small increase in carbon, but an unnecessary one.
.
#26
Registered User
iTrader: (1)
Join Date: Mar 2003
Location: calgary
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
although the problem probably is the k&n, if that doesn't work I'd guess then it's the y-pipe+test pipes......i've read lots of posts of people who swap the headers and/or cats as wlel as the y-pipe and loose A LOT of power (versus keeping the stock y)
#27
Originally Posted by 99atlantic
although the problem probably is the k&n, if that doesn't work I'd guess then it's the y-pipe+test pipes......i've read lots of posts of people who swap the headers and/or cats as wlel as the y-pipe and loose A LOT of power (versus keeping the stock y)
#32
Originally Posted by StarcraftBW
^^^why don't you switch car and race.....he may pull on you harder lol......
#34
I put borla td, top speed test pipes, aem cai, crawford intake. it pulled pretty good up top but down low didnt feel as strong i guess bc up top was so much more it made it seem not as strong down low but it really was.
#35
Registered User
iTrader: (8)
Join Date: Aug 2005
Location: NY
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
I would put the stock air filter back in and use electrical cleaner in a can like stated before to clean the MAF. I've heard a LOT of people having this prob. in other vehicles when using K&N.(these new cars have really sensitive MAF's)
#36
Registered User
iTrader: (16)
Join Date: Mar 2004
Location: Nashville, TN
Posts: 2,939
Likes: 0
Received 0 Likes
on
0 Posts
Have you done a dyno yet? If he starts pulling from you in the upper rpms it might be because of the lose of topend power with the MREV. I have also heard that if you are throwing a CEL with testpipes then the ECU tries to compensate for emissions sake and that can hurt ur power. And also check out the MAF like others have stated.
#37
I'm at work right now so I cant clean the maf. I'm actually going to borrow a buddies 06 intake and clean the maf to find out if there is a difference. Also, the MREV is supposed to only drop peak power by 2-4whp. I dont have the CEL problems because I have the non-foulers. I know my car does run very very rich though, this entire thing might be caused by the intake. Thanks for the help guys, i'll definitely look into finding the culprit.
#40
If you ever have to service your car clean your plugs i took mine to get serviced and they told me i was running nitrous bc the plugs were red. wow good ole nissan service.